American Audio Q-2422/SX Technical Specifications - Model Q-2422/SX, Aux:, Rec:, Aux:, Mid:, Line:, Line:, Bass:, Bass:, Model:, Phono:, Phono:, Weight:, Treble:, Treble:, Dimensions:

TECHNICAL SPECIFICATIONS

Technical Specifications - Model Q-2422/SX

Model: Q-2422/SX™, 2 Channel Mixer

Power supply: AC 115/230V, 50/60Hz selectable

Dimensions: 19” W x 7” D x 2.25” H / 482x 176x 65mm

Weight: 8.5 lbs. / 3.8 kg

Crossfader: FF-Plus - Optical detecting faders start control - Low grounding impedance crossfader

Power Consumption: 5W typical, 7W w/ full headphone output

Headphone impedance: 16 Ohms

Input Sensitivity (Level/Impedance):

Line: -14dBV (200mV) 12K Ohm +/- 2dB

Microphone: -49 dBV (3.6mV / 3K Ohms +/- 3 dB

Phono: -48dBV (4mV) 47K Ohms +/- 3dB

Aux: -14 dBV (200mV) / 47K Ohms +/- 2dB

Output Sensitivity (Level/Impedance):

Rec Out (RCA): -10dBV (316mV) / 2.2K Ohms +/- 2dB

Master Out (RCA): 0dBV (1V) / 610 Ohms +/-2dB

Phones (Load+32 Ohms): -8dBV (0.4V) /33 Ohms +/-2dB

Maximum Output (Load = 47K, THD = 5%)

Rec: < 18dBV (8V)

Master (RCA): < 18dBV (8V)

Balanced (XLR): < 18dBV (8V)

Channel Balance: Within 3dB

Frequency Response:

Line: 20Hz - 20KHz, ± 1dB

Phono: 20Hz - 20KHz, ± 1.5dB (RIAA)

Aux: 20Hz - 20KHz, ± 1dB

Microphone: 20Hz - 20KHz, +1,-3dB

THD - Total Harmonic Distortion (1Khz, 0dBV Output):

Master Output (Load = 47K Ohms): Less than 0.2%

Phono (Load = 32K Ohms): Less than 0.5%

Channel Equalizer:

Bass: +12 ± 1dB, -22 ± 2 dB at 70KHz

Mid: +12 ± 1dB, -27 ± 2 dB at 1KHz

Treble: +13 ±1dB, -17 ± 2 dB at 13KHz

Microphone Equalizer:

Bass: +12 ± 1dB, -12 ± 1 dB at 100KHz

Treble: +12 ± 1dB, -12 ± 1 dB at 10KHz

NOTES:

The specifications are subject to change to any improvement by negotiations in advance. The parts are subject to change to any improvement within the range of the specifications.