American Audio Q-Record Q RECORD USB PLAYER BASIC OPERATIONS (CONT.)

5. stoppinG pLaYBack - Figures 4 & 5

Stopping playback will not stop the reading mecha-

nism, but merely pause the track, this function al-

lows the unit to begin play instantly. The reading

mechanism will only stop if a USB device is re-

moved. Press the pLay/paUsE bUttOn (48) dur-

ing playback. This will pause playback at the exact

same point the pLay/paUsE bUttOn (48) was

pressed.

3. startinG pLaYBack - Figure 4

When a USB device is connected pressing the pLay/

paUsE bUttOn (48) to start playback. The pLay/

paUsE bUttOn LED will glow as soon as playback

begins.

Q RECORD USB PLAYER BASIC OPERATIONS (CONT.)

Figure 4

Figure 5

4. pausinG - Figure 4

This function pauses playback at the exact same point the pLay/paUsE bUttOn (48) was pressed. Pressing

the pLay/paUsE bUttOn (48) will switch between play and pause modes. When the unit is in pause mode

the pLay/paUsE bUttOn LED will begin to flash repeatedly.

1. Select the channel to record from and turn the RECORD SELECT kNOB (45) to that channel.

Insert your USB device into the USB port (49).

2. Press the RECORD START/ STOP button (46) on the Q Record, when the button LED begins to

blink start playing the track(s) you wish to record. Your are now recording to your USB device.

3. After you finished recording your desired material, press the RECORD START/STOP button (46)

to stop recording to your USB device.