American Audio SDJ-2 12. CHANGING THE TIME DISPLAY (39)\TIME BAR (40):

©American Audio® - www.americanaudio.us - SDJ2™ Instruction Manual Page 20
bASIC OPErATIONS (CONT.)
Figure 18
12. CHANGING THE TIME DISPLAY (39)\TIME BAR (40):
DURING NORMAL PLAYBACK, press the folDer knob (8) for at least 2 seconds to enter the PRESET
MENU. Turn the folDer knob (8) until TIME MODE is displayed, push the knob to toggle between the two
time settings. After you have chose your desired setting turn the knob back to display PRESET and then press
the knob again to exit. The following is a break down of the time settings and their definitions:
TIME BAR INDICATOR - Details the time defined in the time meter (39) as a visual bar icon. As with the
time meter (39) this bar is also dependent on the selected time function elapSeD, or remain. This bar will
begin to flash when a track is ending regardless of which time function you are in. Use the flashing bar as a
visual reminder that a track is ending.
1) ELAPSED - This describes the time in the LCD as the current TRACKS Elapsed running time.
2) REMAIN - This describes the time in the LCD as the current TRACKS remaining running time.