©American Audio® - www.americanaudio.com - UCD-100 Instruction Manual Page 16
6. STARTING PLAYBACK
Insert an audio CD as describe on the previous page (LOaDiNG DiSCS). Pressing the PLay/PauSE buttON
(15) with an audio CD inserted will immediately start playback. the point at which playback starts (cue point)
will automatically be stored in the memory as the cue point. the unit will return to this cue point (the point at
which playback started) when the CuE buttON (16) is pressed.
BaSiC OPEraTiON
1) Press the PLay/PauSE buttON (15)
during playback to pause at that point.
2) Press the CuE buttON (16) during
playback to return the track to it’s last
cue point.
figure 9
figure 8
7. STOPPING PLAYBACK
Stopping playback will not stop the drive mechanism, but merely pause or cue the track. there are two ways
to stop playback:
8. PAUSING
Pausing temporarily stops playback. Pressing the PLay/PauSE buttON (15) changes the operating mode
between play and pause. the PLay/PauSE buttON LED will flash repeatedly when pause mode is activated
or when a track is in cue mode.
figure 7