American Audio XDM-250TTM Input Sensitivity Level/Impedence LOAD=47K OHM, Frequency Response

XDM-250T™	Specifications
Technical Specifications - Model XDM-250T

Model: XDM-250T/Turntable Pro, 2 Channel Mixer

POWER SUPPLY:	AC 10V, 500mA - 6.3mm Jack
DIMENSIONS:	7.55 ” W x 9.3 ” D x 3.22 ” H
WEIGHT:	5.2 Lbs./2.3 kg
CROSSFADER:	Optical detecting fader start control -
	Low grounding impedance crossfader
POWER CONSUMPTION:	5W typical, 7W w/ full headphone output
HEADPHONE IMPEDANCE:	16 Ohms
ENVIRONMENTAL CONDITION: Operating Temperature 5 to 35 deg. C
	Humidity 25 to 85% RH (non-condensing)
	Storage Temperature -20 to 60 deg. C

Input Sensitivity (Level/Impedence): LOAD=47K OHM

LINE:	-14dBV /12K OHM	+/- 3dB
PHONO:	-50dBV /47K OHM	+/- 3dB
MICROPHONE:	-54dBV /3K OHM +/- 3dB

Output Sensitivity (Level/Impedence): Note: 0dBV=1Vrms

ITEM 0dBV OUTPUT
MASTER OUT (RCA):	0dBV /220 OHM
PHONES (LOAD=32 OHMS):	-3dBV /33 OHM +/- 3dB

Maximum Output (Load = 47K, THD = 5%)

MASTER (RCA):	< 18dBV (8V)
PHONES (Load=32 ohms):	< 6dBV (2V)
CHANNEL BALANCE:	Within 3dB

Frequency Response:

LINE:	20Hz - 20KHz, ± 2dB
PHONO:	20Hz - 20KHz, +2,-3dB (RIAA)
MICROPHONE:	20Hz - 20KHz, +2,-3dB

Output Noise (IEC-A WEIGHTED):

LINE/AUX:	LESS THAN -70dBV
PHONO:	LESS THAN -65dBV
MIC:	LESS THAN -55dBV

THD - Total Harmonic Distortion (1Khz, 0dBV Output):

MASTER OUTPUT (LOAD = 47K OHMS): Less than 0.2%
PHONO: (LOAD = 32 OHMS):	Less than 0.3%
CROSS TALK:	< 40dB @ 1Khz between left and right channels

Channel Equalizer:

LOW:	+15 / -22	+/- 3dB AT 70Hz
TREBLE:	+15 / -19	+/- 3dB AT 13KHz

Components and parts are subject to change for improvements within the range of the specifications.

©American Audio® - www.americandj.com - XDM-250T™ Instruction Manual Page 11