Alpha Moon™ Lamp Replacement
Lamp Replacement: Caution! Never open the unit when in use. Always disconnect the main power and allow the unit ample time to cool before attempting to replace the lamp. Remember always replace with the same type lamp and fuse.
1.Be sure to follow the proper procedures when handling halogen lamps.
2.Lamp replacement has been made simple by incorporating the use of a removable cover and retained by a thumb screw.
3.Remove the thumb screw on the rear of the unit that holds the socket assembly cover in place.
4.Carefully pull back the protective cover.
5.Remove and replace the bulb.
6.Reassemble in reverse order.
Retaining thumb screws
1 2 3 4 5 6 7 8 9 10 ON
Alpha Moon™ Focusing
Focusing:
To focus an Alpha Moon;™
1.Be sure the unit is turned on and operating normally.
2.Located the thumb screw on the bottom of the unit, that holds the focusing lens place. Loosen the thumb screw.
3.Adjust the focus by manually sliding the lens back and forth, until you obtain your desired focus.
4.Tighten the thumb screw after you achieve your desired focus.
5.Proper focus should consist of tight and defined beams of light.
Alpha Moon™ Cleaning
Due to fog residue, smoke, and dust, cleaning the internal and external optical lenses must be carried out periodically to optimize light output.
1.Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2.Use a brush to wipe down the fan grill.
3.Clean the external optics with glass cleaner and a soft cloth every 20 days. Situation may very. If used heavily in clubs with lots of fog, cleaning may be required more often.
4.Clean the internal optics with glass cleaner and a soft cloth every
5.Always be sure to dry all parts completely before plugging the unit in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue, dust, dew).
©American DJ Supply® - www.americandj.com - Alpha Moon™ Instruction Manual Page 11 | ©American DJ Supply® - www.americandj.com - Alpha Moon™ Instruction Manual Page 12 |
