User Instructions
Crystal™
American DJ
4295 Charter Street
Los Angeles Ca. 90058
www.americandj.com
Crystal™ Introduction
Introduction:
Thank you for purchasing the Crystal™ by American DJ®. For your convenience the Crystal™ has been lamped and tested before being shipped to you. The unit is ready to be used, there is no assembly required. Please read the following instructions before attempting installation or using your new Crystal™.
Customer Support:
American DJ® provides a toll free customer support line, to provide set up help and to answer any question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.americandj.com for any comments or suggestions.
Service Hours are Monday through Friday 10:00 a.m. to 5:00 p.m. Pacific Standard Time.
Voice: | (800) |
Fax: | (323) |
support@americandj.com |
Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void your manufactures war- ranty. In the unlikely event your unit may require service please contact your nearest American DJ dealer.
Do not discard the shipping cartoon in the trash. Please recycle when ever possible.
HALOGEN LAMP WARNING!
This fixture is fitted with a halogen lamp which is highly susceptible to damage if improperly handled. Never touch lamp with your bare fingers as the oil from your hands will shorten lamp life. Also, never move the fixture until the lamp has had ample time to cool. Remember, lamps are not covered under warranty conditions.
©American DJ Supply® - www.americandj.com - Crystal™ Instruction Manual Page 2
