Ruby Beam™ | Control & Functions |
DANGER | Model | : Ruby Beam | |
VISIBLE LASER RADIATION | Serial No : | ||
Power | : | ||
LASER DIODE | |||
Fuse | : | ||
WAVELENGTH : 635~650 nm | |||
Max Output : <4.9mW | Bulb | : | |
Class IIIa Laser Product | |||
LEVEL SOUND
MIN | MIN | FUSE |
1 | 2 | 3 | 4 |
1.Audio Sensitivity Knob - This adjust audio sensitivity of the internal microphone (2). Turning the sensitivity knob in the clockwise direction will increase the sensitivity to sound. Turning the knob in the counter clockwise direction will decrease the fi xture’s sensitivity to sound. If the knob is turned completely in the
2.Microphone - This microphone receives external low frequencies to trigger the unit in
3.Power Cord Connection - This connection is used to supply main power to the fi xture. Use only the supplied I.E.C. power cord. Be sure the main power matches the required power of your fi xture. The rated power requirements are clearly marked on the rear panel of the unit.
4.Fuse Holder - This housing stores the 2 amp GMA protective fuse. Always replace with the exact same type fuse, unless otherwise instructed, by an authorized American DJ® service technician.
Ruby Beam™ | Operation |
Power Supply: This unit is available in either 120v or 220v option. Before plugging your unit in be sure the source voltage in your area matches the required voltage for your American DJ® Ruby Beam.™ Please refer to the power lable on the rear panel of the unit.
General Operation: This fixture is designed to operate as a stand alone unit to sound. The Ruby Beam™ is ready to be plugged in out of the box, there is no power switch. After plugging the fixture in the laser will immediately begin to cycle through the many built in programs. The programs cycle through automatically when the unit is operating and may not be selected manually. The unit requires sound to operate and will automatically blackout without sound to conserve laser life. If the unit does not turn on after the unit has been plugged in, be sure the sound sensitivity is tuned up (1), fuse has not blown, and the unit is properly plugged in to a matching wall outlet. If problem continue to persist, please contact customer support for further instructions.
Sensitivity Knob: A sound sensitivity knob is located on the rear of the unit. Use this knob to regulate the amount of sound it takes to trigger the unit. Turning the knob in a clockwise direction will increase the units sensitivity to sound, turning the knob in a
Ruby Beam™ | Cleaning |
Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the internal and external lenses should be carried out periodically to optimize light output.
1.Use normal glass cleaner and a soft cloth to wipe down the out- side casing.
2.Clean the external optics with glass cleaner and a soft cloth every 20 days.
3.Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy use we rec- ommend cleaning on a monthly basis. Periodic cleaning will ensure longevity, and crisp beam output.
©American DJ® - www.americandj.com - Ruby Beam™ Instruction Manual Page 5 | ©American DJ® - www.americandj.com - Ruby Beam™ Instruction Manual Page 6 |
