![](/images/new-backgrounds/1304551/3045515x1.webp)
Trance Wheel™ | Control & Functions |
1
2
3
4
5
6
7
8 | 9 | 7 | 10 | 11 | 12 |
Trance Wheel™ | Control & Functions |
1.Mirror - This is a highly reflective surface mirror specifically designed to optimize and enhance beam output. Never use glass cleaner that contains ammonia to clean the surface of the mirror (such as Windex).
2.Lens - This is a fully focusing high quality lens. Focus the lens by manually turning the lens in a clockwise or
3.Filter - This unit comes with a
4.Lamp Assembly - This assembly holds a
5.Lamp Assembly Retaining Screws - These two screw hold the lamp assembly in place.
6.Lamp Assembly Cover - This plate accesses the lamp socket assembly. This cover is held securely in place by a single thumb screw
(7).
7.Lamp Cover Retaining Screw - This thumb screw holds the lamp socket assembly cover (6) into place
8.Function Switch - This is a
9.Microphone - This microphone receives external low frequencies to trigger the unit in
10.Fan - Cooling fan. For optimal performance keep this fan grill clean at all times.
11.Fuse Holder - This housing stores the protective 3 amp fuse. Always replace with the same exact fuse.
12.Power Cord - Connect only to a matching power outlet. Never use this fixture is the ground prong has been removed or broken off.
©American DJ® - www.americandj.com - Trance Wheel™ Instruction Manual Page 5 | ©American DJ® - www.americandj.com - Trance Wheel™ Instruction Manual Page 6 |