IMPORTANT:
Flexible supply line/coupling must be used. ! Solenoid valve failure due to hard plumbing connections WILL VOID WARRANTY. It is recommended that a filter or strainer be
installed in the water supply line.
Typical water supply:
OPTIONAL MANUAL BYPASS |
|
Provisions are made in the dryer S.A.F.E. system for the | The water connection for the manual bypass is made to the |
installation of an optional manual bypass. Depending on | “T” or “four way” fitting which has a 3/8” F.P.T. and a coupling |
the model dryer, the connections for the manual bypass are | must be used to provide the minimum 1/2” supply (feed) |
made at the “T” or “four way” fitting located in the outlet supply | line. |
side of the water solenoid valve. The use and connections of |
|
this manual bypass are at the option or discretion of the owner. | If the rear area of the dryer, or the water supply is located in an |
| area where it will be exposed to cold/freezing temperatures, |
| provisions must be made to protect these water lines from |
| freezing. |
26 | American Dryer Corp. |
