American Dryer Corp D-78 installation manual SINGLE-PHASE 1Ø Electrical Connection Leads, Ground

SINGLE-PHASE (1Ø) ELECTRICAL

CONNECTION LEADS

Black			White			Green
+	-
Positive		Neutral			Ground
				or
				L2

b.3-Phase (3ø) Wiring Connections (hookup) - For Non-Reversing Models Only

The electrical connections on ALL 3-phase (3ø) gas model dryers are made into the rear service box located at the upper left area of the dryer.

NOTE: A CIRCUIT SERVICING EACH DRYER MUST BE PROVIDED.

If local codes permit, power to a gas dryer can be made by the use of a flexible U.L. listed power cord/ pigtail (wire size must conform to rating of dryer), or the dryer can be hard wired directly to the service breaker panel. In ALL cases, a strain relief must be installed where the wiring enters the dryer.

21