![](/images/new-backgrounds/1320732/320732105x1.webp)
2.Water Connections:
The water connection is made to the 1/2” M.P.T. bushing of the electric water solenoid valve located either at the rear upper left area of the dryer or rear middle right area on 320/330 models (see photo). The water solenoid valve has a 3/8” M.P.T. connection and a 1/2” bushing is supplied to provide the minimum
IMPORTANT: Flexible supply line/coupling must be used. Solenoid valve failure due to hard plumbing connections WILL VOID WARRANTY. It is recommended that a filter or strainer be installed in the water supply line.
Typical water supply...
49