3.Grounding

A ground (earth) connection must be provided and installed in accordance with state and local codes. In the absence of these codes, grounding must conform to applicable requirements of the National Electrical Code ANSI/NFPA NO. 70-LATEST EDITION, or in Canada, the installation must conform to applicable Canada Standards: Canadian Electrical Codes Parts 1 & 2 CSA C22.1-1990 or LATEST EDITION. The ground connection may be to a proven earth ground at the location service panel.

For added personal safety, when possible, it is suggested that a separate ground wire (no. 18 minimum) be connected from the ground connection of the dryer to a grounded cold water pipe. DO NOT ground to a gas pipe or hot water pipe. The grounded cold water pipe must have metal-to-metal connection ALL the way to the electrical ground. If there are any nonmetallic interruptions, such as, a meter, pump, plastic, rubber, or other insulating connectors, they must be jumped out with no. 4 copper wire and securely clamped to bare metal at both ends.

IMPORTANT: For personal safety and proper operation, the dryer must be grounded.

Provisions are made for ground connection in each dryer at the electrical service connection area.

4.Electrical Connections

A wiring diagram is located inside the control box for connection data.

If local codes permit, power to the dryer can be made by the use of a flexible U.L. listed power cord/pigtail (wire size must conform to rating of dryer), or the dryer can be hard wired directly to the service breaker panel. In both cases, a strain relief must be installed where the wiring enters the dryer.

a. Gas and Steam Models Only

IMPORTANT: A separate protected circuit must be provided to each dryer.

1) Single-Phase (1ø) Wiring Connections/Hookup

The electrical input connections on ALL single-phase (1ø) gas dryers and steam dryers are made into the rear service box located at the upper left area of the dryer.

21

Page 25
Image 25
American Dryer Corp D3030 installation manual

D3030 specifications

American Dryer Corp D3030 is a state-of-the-art commercial dryer designed to meet the needs of high-demand laundry environments. Renowned for its efficiency, durability, and advanced technology, the D3030 has become a preferred choice among laundromats, hotels, and other facilities requiring reliable laundry solutions.

One of the standout features of the D3030 is its powerful drying performance. Equipped with a robust 30-pound capacity, it can effectively handle large loads, significantly reducing drying times and increasing productivity. The dryer utilizes a high-efficiency heat source that not only quickens the drying process but also conserves energy, making it an environmentally friendly option. The dual airflow system enhances drying efficiency by ensuring even heat distribution throughout the drum, resulting in thoroughly dried laundry every time.

The D3030 incorporates advanced technology for optimal control and user convenience. A digital control panel allows operators to easily select drying cycles, temperatures, and times, tailoring the process to the specific needs of various fabrics. The intelligent sensor system monitors moisture levels within the drum, adjusting the drying time accordingly. This feature not only prevents over-drying and fabric damage but also saves energy, making the dryer more cost-effective to operate.

Durability is another hallmark of the D3030. Constructed with heavy-duty materials, it is designed to withstand the rigors of daily use in high-traffic environments. The stainless-steel drum is both rust-resistant and easy to clean, ensuring a long operational lifespan. Its sturdy design minimizes vibration and noise, contributing to a quieter working environment.

Safety features are paramount in the D3030’s design. It includes a thermal fuse and other safety mechanisms to prevent overheating, giving operators peace of mind while using the dryer. Additionally, a large door with a secure latch allows for easy loading and unloading, enhancing user experience.

In summary, the American Dryer Corp D3030 is a powerful, efficient, and durable commercial dryer that excels in meeting the demands of any busy laundry operation. With its combination of advanced technology, customizable settings, and safety features, it offers a comprehensive solution for those seeking high-performance drying capabilities. The D3030 stands as a testament to American Dryer Corp's commitment to quality and innovation in the laundry industry.