American Dryer Corp D3030 installation manual GAS Information

Models: D3030

1 60
Download 60 pages 9.56 Kb
Page 28
Image 28

G. GAS INFORMATION

It is your responsibility to have ALL plumbing connections made by a qualified professional to assure that the gas plumbing installation is adequate and conforms to local and state regulations or codes. In the absence of such codes, ALL plumbing connections, materials, and workmanship must conform to the applicable requirements of the National Fuel Gas Code ANSI Z223.1-LATEST EDITION, or in Canada, the Canadian Installation Codes CAN/CGA-B149.1-M91 (Natural Gas) or CAN/CGA-B149.2-M91 (Liquid Propane [L.P.] Gas) or LATEST EDITION.

IMPORTANT: Failure to comply with codes or ordinances, and/or requirements in this manual, can result in personal injury and improper operation of the dryer.

The dryer and its individual shutoff valves must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig (3.5 kPa). The dryer must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure test of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.5 kPa).

IMPORTANT: Failure to isolate or disconnect the dryer from supply as noted can cause irreparable damage to the gas valve, which will VOID THE WARRANTY.

WARNING: FIRE OR EXPLOSION COULD RESULT.

1.Gas Supply

The gas dryer installation must meet the American National Standard...National Fuel Gas Code ANSI Z223.1-LATEST EDITION, or in Canada, the Canadian Installation Codes CAN/CGA-B149.1 M91 (Natural Gas) or CAN/CGA-B149.2-M91 (L.P. Gas) or LATEST EDITION, as well as local codes and ordinances and must be done by a qualified professional.

NOTE: Undersized gas piping will result in ignition problems, slow drying, increased use of energy, and can create a safety hazard.

The dryer must be connected to the type of heat/gas indicated on the dryer data label, which is located on the left side panel area behind the top control (access) door. If this information does not agree with the type of gas available, DO NOT operate the dryer. Contact the distributor who sold the dryer or contact JLA.

IMPORTANT: Any burner changes or conversions must be made by a qualified professional.

The input ratings shown on the dryer data label are for elevations up to 2,000 feet (610 meters), unless elevation requirements of over 2,000 feet (610 meters) were specified at the time the dryer order was placed with the factory. The adjustment or conversion of dryers in the field for elevations over 2,000 feet (610 meters) is made by changing each burner orifice. If this conversion is necessary, contact the distributor who sold the dryer or contact JLA.

IMPORTANT: THIS GAS DRYER IS NOT PROVIDED WITH AN INTERNAL GAS SUPPLY SHUTOFF AND AN EXTERNAL GAS SUPPLY SHUTOFF MUST BE PROVIDED.

24

Page 28
Image 28
American Dryer Corp D3030 installation manual GAS Information

D3030 specifications

American Dryer Corp D3030 is a state-of-the-art commercial dryer designed to meet the needs of high-demand laundry environments. Renowned for its efficiency, durability, and advanced technology, the D3030 has become a preferred choice among laundromats, hotels, and other facilities requiring reliable laundry solutions.

One of the standout features of the D3030 is its powerful drying performance. Equipped with a robust 30-pound capacity, it can effectively handle large loads, significantly reducing drying times and increasing productivity. The dryer utilizes a high-efficiency heat source that not only quickens the drying process but also conserves energy, making it an environmentally friendly option. The dual airflow system enhances drying efficiency by ensuring even heat distribution throughout the drum, resulting in thoroughly dried laundry every time.

The D3030 incorporates advanced technology for optimal control and user convenience. A digital control panel allows operators to easily select drying cycles, temperatures, and times, tailoring the process to the specific needs of various fabrics. The intelligent sensor system monitors moisture levels within the drum, adjusting the drying time accordingly. This feature not only prevents over-drying and fabric damage but also saves energy, making the dryer more cost-effective to operate.

Durability is another hallmark of the D3030. Constructed with heavy-duty materials, it is designed to withstand the rigors of daily use in high-traffic environments. The stainless-steel drum is both rust-resistant and easy to clean, ensuring a long operational lifespan. Its sturdy design minimizes vibration and noise, contributing to a quieter working environment.

Safety features are paramount in the D3030’s design. It includes a thermal fuse and other safety mechanisms to prevent overheating, giving operators peace of mind while using the dryer. Additionally, a large door with a secure latch allows for easy loading and unloading, enhancing user experience.

In summary, the American Dryer Corp D3030 is a powerful, efficient, and durable commercial dryer that excels in meeting the demands of any busy laundry operation. With its combination of advanced technology, customizable settings, and safety features, it offers a comprehensive solution for those seeking high-performance drying capabilities. The D3030 stands as a testament to American Dryer Corp's commitment to quality and innovation in the laundry industry.