SPEEDDOME OPTIMA LT PROGRAMMABLE DOME CAMERA 8200-0181-03, REV. C
QUICK REFERENCE GUIDE 6 of 8
See Supported AD Keyboards on page 5 for
button names used on specific keyboards.
Operate Commands
The controller must be in Operate mode to use
these commands.
Dome Function Keyboard Command
Call Preset 1-16 1-16 Shot
Reset Iris 66 Shot
Flip 67 Shot
Run Pattern # 1 70 Shot
Run Pattern # 2 71 Shot
Run Pattern # 3 72 Shot
Auto Repeat Pattern #1 69 Shot, then 70 Shot
Auto Repeat Pattern #1 69 Shot, then 71 Shot
Auto Repeat Pattern #1 69 Shot, then 72 Shot
In addition, the following commands are not
supported:
• Set Auxiliary 4 OFF (63 Shot)
• Set Auxiliary 4 ON (64 Shot)
Program Commands
The controller must be in Program mode to use
these commands.
Dome Function Keyboard Command
Reset Dome 65 Shot
Program Preset 1-16 Shot
Define Pattern #1 70 Shot
Define Pattern #2 71 Shot
Define Pattern #3 72 Shot
End Pattern Definition 68 Shot
Save New Pattern 69 Shot
Clear Pattern #1 62 Shot
Clear Pattern #2 63 Shot
Clear Pattern #3 64 Shot
Enter V-phase Adjustment 67 Shot, followed by iris
open/close
Exit V-phase Adjustment 67 Shot
MegaPower 48 Matrix Switcher/ Controller System See Supported AD Keyboards on page 5 for
button names used on specific keyboards.
Dome Function Keyboard Command
Define Pattern # 1 121 - F2
Define Pattern # 2 122 - F2
Define Pattern # 3 123 - F2
End Pattern Definition 120 - F2
Save New Pattern 130 - F2
Go to Pattern # 1 31 - F1
Go to Pattern # 2 32 - F1
Go to Pattern # 3 33 - F1
Run Pattern # 1 21 - F1
Run Pattern # 2 22 - F1
Run Pattern # 3 23 - F1
Auto Repeat Pattern # 1 41 - F1
Auto Repeat Pattern # 2 42 - F1
Auto Repeat Pattern # 3 43 - F1
Clear Pattern # 1
(SpeedDome RS-422) 131 - F2
Clear Pattern # 2
(SpeedDome RS-422) 132 - F2
Clear Pattern # 3
(SpeedDome RS-422) 133 - F2
Flip (Rotate dome 180º) 19 - F1
Reset Iris 20 - F1
Return to Auto Iris / Auto
Focus 69 - F1
Reset Dome 30 - F1
Enter Vertical Phase
Adjust Mode 38 - F2
Exit Vertical Phase Adjust
Mode 39 - F2
In addition, the following commands are not
supported:
• Set Auxiliary 4 OFF (70-F1)
• Set Auxiliary 4 ON (71-F1)