SPEEDDOME OPTIMA LT PROGRAMMABLE DOME CAMERA 8200-0181-03, REV. C
QUICK REFERENCE GUIDE 7 of 8
AD168/MegaPower 168 Matrix Switcher/ Controller System See Supported AD Keyboards on page 5 for
button names used on specific keyboards.
Dome Function Keyboard Command
Define Pattern # 1 121 - F2
Define Pattern # 2 122 - F2
Define Pattern # 3 123 - F2
End Pattern Definition 120 - F2
Save New Pattern 130 - F2
Go to Pattern # 1 31 - F1
Go to Pattern # 2 32 - F1
Go to Pattern # 3 33 - F1
Run Pattern # 1 21 - F1
Run Pattern # 2 22 - F1
Run Pattern # 3 23 - F1
Auto Repeat Pattern # 1 41 - F1
Auto Repeat Pattern # 2 42 - F1
Auto Repeat Pattern # 3 43 - F1
Clear Pattern # 1
(SpeedDome RS-422) 131 - F2
Clear Pattern # 2
(SpeedDome RS-422) 132 - F2
Clear Pattern # 3
(SpeedDome RS-422) 133 - F2
Flip (Rotate dome 180º) 19 - F1
Reset Iris 20 - F1
Return to Auto Iris / Auto
Focus 69 - F1
Reset Dome 30 - F1
Enter Vertical Phase
Adjust Mode 38 - F2
Exit Vertical Phase Adjust
Mode 39 - F2
In addition, the following commands are not
supported:
• Set Auxiliary 4 OFF (70-F1)
• Set Auxiliary 4 ON (71-F1)
These commands are supported by systems using
the Manchester protocol.
See Supported AD Keyboards on page 5 for
button names used on specific keyboards.
Verified with AD2050, AD2091, and AD168 with CCM
(v. 3.01)
Dome Function Keyboard Command
Program Presets 1 - 64 1- 64 Set Preset
Call Presets 1 - 64 1- 64 Call Preset
Program Pattern 1 70 Set Preset
Program Pattern 2 71 Set Preset
Program Pattern 3 72 Set Preset
Save Pattern
Programming 69 Set Preset
Cancel Pattern
Programming 68 Set Preset
Repeats following pattern 69 Call Preset
Run Pattern 1 70 Call Preset
Run Pattern 2 71 Call Preset
Run Pattern 3 72 Call Preset
Reset Dome 65 Set Preset
Resume Auto Focus / Auto
Iris 66 Call Preset
Flip (Rotate dome 180º) 67 Call Preset
Activate / Deactivate
V-phase delay setting
adjustment
67 Set Preset