American Dynamics Ultra Drone III manual Specification s

s p e c i f i c a t i o n s

Model Numbers

Housing/Eyeball Assemblies
ADSDUDH2506N . . . . . . . . . .Drone Color NTSC,				2.5-6 mm
ADSDUDH2506P . . .	.		. Drone Color PAL, 2.5-6 mm
ADSDUDH3895N . .	.	.	.Drone Color NTSC,	3.8-9.5 mm
ADSDUDH3895P . . .	.		. Drone Color PAL, 3.8-9.5 mm
ADSDUDH0922N . .	.	.	.Drone Color NTSC,	9-22 mm
ADSDUDH0922P . . .	.		. Drone Color PAL, 9-22 mm
Mounting Bases
ADSDUDPTB . . . .	.	.	.Standard Mounting Base
ADSDUIOB	.		. I/O Board base
Pre-Configured Drones/Mounting Bases
ADSDUDH2506PTN .	.	.	.Drone Color NTSC,	2.5-6 mm with standard base
ADSDUDH2506PTP .	.	.	.Drone Color PAL, 2.5-6 mm with standard base
ADSDUDH2506ION . .	.		. Drone Color NTSC,	2.5-6 mm with I/O base
ADSDUDH2506IOP . .	.		. Drone Color PAL, 2.5-6 mm with I/O base
ADSDUDH3895PTN .	.	.	.Drone Color NTSC,	3.8-9.5 mm with
			standard base
ADSDUDH3895PTP .	.	.	.Drone Color PAL, 3.8-9.5 mm with standard base
ADSDUDH3895ION . .	.		. Drone Color NTSC,	3.8-9.5 mm with I/O base
ADSDUDH3895IOP . .	.		. Drone Color PAL, 3.8-9.5 mm with I/O base
ADSDUDH0922PTN .	.	.	.Drone Color NTSC,	9-22 mm with standard base
ADSDUDH0922PTP .	.	.	.Drone Color PAL, 9-22 mm with standard base
ADSDUDH0922ION . .	.		. Drone Color NTSC,	9-22 mm with I/O base
ADSDUDH0922IOP . .	.		. Drone Color PAL, 9-22 mm with I/O base

Operational

Pan Travel	.	.370˚ with end stop
Tilt Travel	.	90˚
Camera Synchronization .	. Line-lock
Video Output Connector .	. Female BNC

Electrical

Input Voltage . .	. . . .	.24 VAC, 50/60 Hz, Class 2 LPS
Design Tolerance .	. . .	. 16 to 36 VAC, 50/60 Hz
Power	. . . . . . .	. .7.5 watts, maximum

Mechanical

Height	.	205 mm (8 in)
Eyeball Diameter . . . .	.	120 mm (4.7 in)
Weight
Chassis and Camera . .		.0.85 kg (2.2 lbs)
Standard Base . . . .	.	0.06 kg (0.14 lbs)
I/O Board Base . . . .		.0.16 kg (0.36 lbs)
RDULTRA	.	0.66 kg (1.45 lbs)
Shipping Weight . . . .		.1.7 kg (3.74 lbs)

Environmental

Operating Temperature . . .-10˚ to 50˚ C (14˚ to 122˚ F) Humidity . . . . . . . . 0% to 95% RH (non-condensing) Storage Conditions . . . . -20˚ to 65˚ C (-4˚ to 149˚ F)

Regulatory

Emissions . . . . . . . .FCC: 47 CFR Part 15, Subpart B Class B CE: EN55022 Class B

AS/NZS 3548, Class B CISPR22, Class B ICES-003

Immunity . . . . . . . . CE: EN50130-4 Safety . . . . . . . . . .UL1950

CSA22.2 No. 950 EN60950-1

IEC 60950-1

Camera

Imager	.	. Interline transfer 1/3 inch CCD array
Scanning System . . .	.	. 2:1 interlace
Video Output	.		.1.0 Vp-p, 75 Ω, composite
S/N Ratio	.	.	50 dB (typical)
Horizontal Resolution . . . .540 lines at center
Minimum Illumination . .	.		.0.65 lux (f1.2 lens)
White Balance . . . .	.	. AWB
NTSC
Effective Pixels . . .	.	.	768 (H) x 494 (V)
Scanning	.	.	540 lines, 60 fields, 30 frames
Horizontal	.	.	15.734 kHz

   Vertical . . . . . . . . 59.9 Hz

PAL

Effective Pixels .	.	.	.	.	752 (H) x 582 (V) pixels
Scanning . . .	.	.	.	.	540 lines, 50 fields, 25 frames
Horizontal . . .	.	.	.	.	15.625 kHz
Vertical . . . .	.	.	.	.	50 Hz

Lens

Design . . . . . . . . . Vari-focal

Focal Length . . . . . . .2.5 to 6 mm, 3.8 - 9.5 mm, 9 - 22 mm Aperture . . . . . . . . .f1:1.4

Mount . . . . . . . . . CS Viewing angle

2.5-6 mm . . . . . . . . 108.2˚ x 80.4˚ (wide) & 47.6˚ x 35.6˚ (tele) 3.8-9.5 mm . . . . . . . 74.2˚ x 54.0˚ (wide) & 30.0˚ x 22.4˚ (tele) 9-22 . . . . . . . . . . 30.7˚ x 22.7˚ (wide) & 14.1˚ x 10.6˚ (tele)

Field of View Formulas

   Horizontal View = (4.4 x A)/B

   Vertical View = (3.3 x A)/B

   A = distance from camera (mm)

   B = lens focal length (mm)

Accessories

Optional Bubbles* for Top Hat Mount

RUCLR .	.	.	.	. . .	.	Clear Bubble (f0)
RUSLV .	.	.	.	. . .	.	Silver Bubble (f2.0)
RUSMK .	.	.	.	. .	.	.Smoked Bubble (f1.0)

   RUGLD . . . . . . . . Gold Bubble (f2.0)

Installation and Removal Accessory

   RHIRT . . . . . . . . .Installation and Removal Tool

Mounts and Adapters

RHIUTH . .	.	.	. .	.	.Top Hat with trim ring
RHIUHC . .	.	.	. .	.	.Hard ceiling bracket (requires RHIUTH )
RHIUFB . .	.	.	. .	.	.Fixed bracket (requires RHIUTH)
RHIUAB . .	.	.	. .	.	.Adjustable bracket (requires RHIUTH)
RHOPN . .	.	.	. .	.	.Pendant Mount
RHIU3X3 .	.	.	. . .	.	3 x 3 in mounting plate
RHIU4X4 . .	.	.	. .	.	.4 x 4 in mounting plate
RHIU2X2 .	.	.	. . .	.	2 x 2 ft tile mount (special Top Hat included)
RHIUIB . .	.	.	. . .	.	I-Beam mount with I-Beam adapter
RHIUCM . .	.	.	. .	.	.Wall mount with corner adapter
RHIULWM .	.	.	. .	.	.Long 0.6 m (24 in) wall mount
RHSDA . .	.	.	. . .	.	SpeedDome snap-hinge housing adapter

*Bubble diameter and depth 176 x 86.5 mm (6.93 x 3.4 in), weight with trim ring 0.13 kg (4.4 oz)

Product offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all products include all features. Availability varies by region; contact your sales representative. Certain product names mentioned herein may be trade names and/or registered trademarks of other companies.

© 2007 Sensormatic Electronics Corporation. All rights reserved. AD0049-DS-200701-R01-A4-EN

www.americandynamics.net