SPEEDDOME ULTRA VIIE DAY/NIGHT CAMERA DOME CONFIGURATION UTILITY 8200-0184-12, REV. A
OPERATOR’S MANUAL SUPPLEMENT 11 of 15
VM16E/ADTT16E (Black Touch Tracker) Supported Protocol SensorNet
RS-4221
Maximum Presets 96 – SensorNet
4 – RS-422
Maximum Patterns2 16
DirectSet Menu Yes3
Address Range 1-16 or 1-643
Notes:
(1) Requires RCSN422 code converter.
(2) Patterns are limited by time and the number of
available dome commands.
(3) Requires firmware version 0701-2833-0103
(EEPROM) / 0701-2834-0201 (Flash PROM) or
newer.
VM32/AD32 Supported Protocol SensorNet
RS-4221
Maximum Presets 96 – SensorNet
4 – RS-422
Maximum Patterns2 16
DirectSet Menu Not supported
Address Range 1-32
Notes:
(1) Requires RCSN422 code converter.
(2) Patterns are limited by time and the number of
available dome commands.
VM961 Supported Protocol SensorNet
RS-422
Maximum Presets 9,9992
Maximum Patterns3 16
DirectSet Menu Not supported
Address Range 1-32
Notes:
(1) Requires software version 5.2 or newer.
(2) Preset information is stored at the host, not the
dome; therefore, divide 9,999 by the number of
domes to determine number of available Presets per
dome.
(3) Patterns are limited by time and the number of
available dome commands.
AD2150/AD2350 Supported Protocol RS-4221
Maximum Presets 162
Maximum Patterns3 16
DirectSet Menu Not supported
Address Range 1-32
Notes:
(1) Requires the AD2083-02 series code converter.
(2) Preset information is stored at the converter, not the
dome.
(3) Patterns are limited by time and the number of
available dome commands.
AD1650 Supported Protocol RS-4221
Maximum Presets 162
Maximum Patterns3 16
DirectSet Menu Not supported
Address Range 1-1284
Notes:
(1) Requires the AD2083-02 series code converter.
(2) Preset information is stored at the converter, not the
dome.
(3) Patterns are limited by time and the number of
available dome commands.
(4) Requires additional equipment to achieve these
numbers. A dome address within each group of 64
or 99 cameras is reserved as a global broadcast
address.
AD168 Supported Protocol SensorNet1 RS-4221 or 2
Maximum Presets 161, 2, 641, 3
Maximum Patterns4 16
DirectSet Menu Not supported
Address Range SensorNet: 1-180
RS-422: 1-991, 5 or 1-1802, 5
Notes:
(1) Requires the appropriate code control module.
(2) Requires the AD2083-02 series code converter.
(3) Presets information is stored at the converter or
control module, not the dome.
(4) Patterns are limited by time and the number of
available dome commands.
(5) Requires additional equipment to achieve these
numbers. A dome address within each group of 64
or 99 cameras is reserved as a global broadcast
address.