SPEEDDOME ULTRA VIIE DAY/NIGHT CAMERA DOME CONFIGURATION UTILITY 8200-0184-12, REV. A
OPERATOR’S MANUAL SUPPLEMENT 12 of 15
AD2050 Supported Protocol RS-4221
Maximum Presets 162
Maximum Patterns3 16
DirectSet Menu Not supported
Address Range 1-10244
Notes:
(1) Requires the AD2083-02 series code converter.
(2) Preset information is stored at the converter, not the
dome.
(3) Patterns are limited by time and the number of
available dome commands.
(4) Requires additional equipment to achieve these
numbers. A dome address within each group of 64
or 99 cameras is reserved as a global broadcast
address.
MegaPower LT Supported Protocol SensorNet UTC
Maximum Presets 96 96
Maximum Patterns1 16 16
DirectSet Menu Yes2 Yes2
Address Range 1-99 1-99
Notes:
(1) Patterns are limited by time and the number of
available dome commands.
(2) Requires a compatible keyboard.
MegaPower 48 Supported Protocol SensorNet
RS-422
Manchester
Maximum Presets 961 64
Maximum Patterns2 16 16
DirectSet Menu Yes3 Yes3
Address Range 1-48 1-48
Notes:
(1) Preset information is stored at the host, not the
dome.
(2) Patterns are limited by time and the number of
available dome commands.
(3) Requires firmware 1.07 or newer and a compatible
keyboard.
MegaPower 1024 Supported Protocol RS-4221 Manchester
Maximum Presets 162 or 603 64
Maximum Patterns4 16 16
DirectSet Menu Not
supported
Not
supported
Address Range 1-10245 1-10245
Notes:
(1) Requires the AD2083-02 series code converter.
(2) Preset information is stored at the converter, not the
dome.
(3) Requires AD2083-02 with firmware version 0701-
11YB-156A or newer. Preset information is stored in
the dome, not the converter.
(4) Patterns are limited by time and the number of
available dome commands.
(5) Requires additional equipment to achieve these
numbers. A dome address within each group of 64
or 99 cameras is reserved as a global broadcast
address.
ADACSNET Control Module1 Supported Protocol USB to RS-232
Maximum Presets 96
Maximum Patterns 16
DirectSet Menu Yes2
Address Range 1-254
Notes:
(1) Compatible with PCs running Windows® 2000 or
XP and with the Intellex system running version 3.2
or higher software.
(2) Requires USB Dome Control Utility software.