Setup
Getting Started
Unpack Teach Me Time! and plug the external AC adapter into the back of the product. Next plug the AC adapter into a standard wall outlet.
Teach Me Time! comes from the factory set to a special “in- store demonstration” mode of the Teach Me Time! Game. To exit this demonstration mode, press any key under the rear hatch.
Setting the Time
The first time you plug in Teach Me Time! you must set the time:
1.Press and hold the SETUP key for two (2) seconds to enter set time mode. The numeric portion of the display flashes and the word “SET” appears.
2.Adjust the time using the HR +/- and MIN +/- keys. Press and hold these keys for one (1) second to scroll rapidly.
3.Tap the SETUP key once quickly to exit.
Battery Backup
Teach Me Time! comes from the factory with two AAA batteries already installed. To replace the batteries, remove the screw from the battery hatch (bottom of unit) using a small screwdriver. If the hatch does not fall open freely, use your fingernail or a paperclip to gently dislodge it.
NOTE: To conserve power, the nightlight and display backlight features of Teach Me Time! do not work while running under battery power.
NOTE: If the battery level is very low Teach Me Time! may not have enough power to clearly announce the time or may become unresponsive. In this event, please replace the batteries with a fresh set.
TIP: The rear hatch conceals the parental controls and is designed to be “child proof”.
To open the hatch, place your thumb on the latch and gently push down and back. You may flex the cover slightly to facilitate opening the hatch:
Do not attempt to open the hatch by using a fingernail to pull in an upward direction as this may break the latch mechanism.
TIP: Included batteries are intended for
Page 8 |
|
Printed in China. | © |
