Rack-Mount Installation, Continued
Step 3 | Position the outer rails in the rack, adjusting the claw brackets and marking the |
| intended position of the mounting holes both on the front and rear of the rack. |
| Tighten the screws on the claw brackets. |
Step 4 |
|
Bolt the front of the slides into place using | |
| head screws are also provided for racks with countersunk holes. |
Step 5 |
|
Bolt the rear of the slides to the rack side rails using four | |
| threaded bracket is provided in case the rack does not have threaded holes. Hex |
| nuts are often difficult to use at the rear of a rack to secure screws. |
Step 6 |
|
Install the chassis slides into the outer slides in the rack. Push the chassis into | |
| the rack until the rear retaining spring engages. Then press the retaining buttons |
| and push the chassis the rest of the way into the rack. |
Step 7 |
|
Plug the AC power cord into the AC receptacle on the power supply module. | |
|
|
14 Megaplex II Chassis Guide
