5:TROUBLESHOOTING

Use the chart below to solve minor UPS installation and operation problems. Refer to www.apc.com with complex UPS problems.

PROBLEM AND/OR POSSIBLE

SOLUTION

CAUSE

 

UPS WILL NOT TURN ON

 

UPS not connected to utility

Check that the power cord from the UPS to the utility power supply is se-

power supply.

curely connected at both ends.

 

 

Battery not connected prop-

Check that battery connector on the rear panel is fully snapped into position.

erly.

 

 

 

Very low or no utility voltage.

Check the utility power supply to the UPS by plugging in a table lamp. If the

 

light is very dim, have the utility voltage checked.

 

 

UPS WILL NOT TURN OFF

 

Internal UPS fault.

Do not attempt to use the UPS. Unplug the UPS, unplug the battery connec-

 

tor on the rear panel, and have it serviced immediately.

 

 

UPS BEEPS OCCASIONALLY

 

Normal operating UPS beeps

None. The UPS is protecting the connected equipment from occasional util-

when running on battery.

ity power irregularities.

 

 

UPS IS NOT PROVIDING EXPECTED BACKUP TIME

The UPS battery is weak due

Charge the battery. Batteries require recharging after extended outages, and

to a recent outage or is near

wear faster when frequently put into service or when operated at elevated

the end of the service life.

temperatures. If the battery is near the end of the service life, consider re-

 

placing even if the replace battery LED is not yet illuminated.

 

 

LEFT HALF, RIGHT HALF, OR CENTER SECTION OF FRONT PANEL LEDS ARE FLASHING

Internal UPS fault. The UPS

Do not attempt to use the UPS. Turn off the UPS, unplug the battery connec-

has shut down.

tor on the rear panel, and have it serviced immediately.

 

 

FRONT PANEL LEDS FLASH SEQUENTIALLY

The UPS has been shut down

None. The UPS will restart automatically when utility power returns.

remotely through software or

 

an optional accessory card.

 

 

 

ALL LEDS ARE OFF AND THE UPS IS PLUGGED INTO A WALL OUTLET

The UPS is shut down or the

None. The UPS will return to normal operation when the power is restored

battery is discharged from an

and the battery has a sufficient charge.

extended outage.

 

 

 

8

Page 9 Page 11
Page 10
Image 10
American Power Conversion 500 VA user manual Troubleshooting
Page 9 Page 11

500 VA specifications

American Power Conversion (APC) is well-known for its innovative power protection solutions, catering to a wide range of markets, including IT, telecommunications, and industrial environments. Among its numerous products, the APC Back-UPS line, specifically the 500 VA (Volt-Amperes) model, stands out as an essential solution for safeguarding sensitive electronic equipment against unexpected power disturbances.

The APC 500 VA is designed to provide reliable uninterruptible power supply (UPS) capabilities. One of its main features is its ability to deliver battery backup during power outages. This ensures that connected devices continue to operate without interruption, which is particularly critical for computers, networking devices, and telecommunications equipment. The 500 VA model generally offers a power output of around 300 watts, making it suitable for basic setups in home offices or small businesses.

Another significant feature of the APC 500 VA is its Automatic Voltage Regulation (AVR). This technology ensures that the output voltage remains stable, even during voltage fluctuations that can occur during storms or utility grid issues. This protects sensitive electronics from potential damage caused by overvoltage or undervoltage situations.

The UPS is equipped with multiple outlets for connecting various devices. Typically, these outlets are a combination of battery backup and surge protection, ensuring that both type of equipment receives necessary power and protection from surges or spikes. Additionally, the unit often features USB ports for easy connection to a computer, allowing users to monitor UPS status and manage power settings through APC’s PowerChute software.

The design of the APC 500 VA is user-friendly and allows for easy setup. Its compact form factor enables effective space-saving which is ideal for desktop environments. The inclusion of LED indicators provides real-time status updates on power conditions and battery health, giving users peace of mind regarding their equipment's safety.

Finally, the APC 500 VA typically comes with a built-in battery that is replaceable, ensuring long-term usability. Regular battery replacement is crucial for maintaining optimal performance, and APC provides users with this convenience.

In summary, the American Power Conversion 500 VA model is a compact and efficient UPS solution featuring battery backup, Automatic Voltage Regulation, multiple outlets, USB connectivity, and user-friendly indicators. Its reliability and protective features make it an excellent choice for anyone looking to safeguard their electronics against power-related disturbances.
Top Page Image Contents