3. Operations
Administration Commands
Administration commands may only be issued by a user with administrative privileges, such as the predefined
Admn user or another user who has been granted administrative privileges with the Set User Admnpriv
command.
User Administration
Creating a user account
The Create User command creates a user account with the specified username and password. See Usernames
and Passwords in this chapter for more information.
To create a user account:
At the AmpMeter PDU: prompt, type create user, optionally followed by a 1-16 character username (Spaces
are not allowed, and usernames are not case sensitive). Press Enter.
At the Password: prompt, type a password of up to 16 alphanumeric and other typeable characters (ASCII 32 to
126 decimal). Passwords are case sensitive. Press Enter. To specify no password, press Enter at the
prompt.
At the Verify Password: prompt, retype the password. Press Enter. To verify no password, press Enter at the
prompt.
Example
The following command creates the user account JaneDoe:
AmpMeter PDU: create user JaneDoe<Enter>
Password: <Enter>
Verify New Password: <Enter>
For security, password characters are not displayed.
Removing a user account
The Remove User command removes a user account.
NOTE: You may remove the predefined user account Admn only if another user account has been granted
administrative privileges using the Set User Admnpriv command.
To remove a user account:
At the AmpMeter PDU: prompt, type remove user, optionally followed by a username. Press Enter.
Page 22 - 301-0399-3 Rev A.