3. Operations
Granting and removing input status viewing privileges
The Set User Envmon command grants or removes input status viewing privileges to/from a user.
NOTE: This command also grants or removes viewing privileges for the status of the optional Equipment
Cabinet Environmental Manager and attached sensors. See the Equipment Cabinet Environmental Manager
Installation and Operations manual for more information.
To grant or remove input status viewing privileges for a user:
At the AmpMeter PDU: prompt, type set user envmon followed by on or off, optionally followed by a
username and press Enter.
Example
The following command grants intput status viewing privileges to the user JohnDoe:
AmpMeter PDU: set user envmon on johndoe<Enter>
Displaying the access privilege levels
The List Users command displays all defined users with their access privilege level.
To display user access privilege levels:
At the AmpMeter PDU: prompt, type list users and press Enter.
Example
The following command displays all users with their access privilege level:
AmpMeter PDU: list users<Enter>
User Privilege Environmental
Name Level Monitoring
JOHNDOE Admin Allowed
JANEDOE User Not Allowed
Adding serial port access to a user
The Add PortToUser command grants a user access to the serial port.
To grant serial port access to a user:
At the AmpMeter PDU: prompt, type add porttouser console and a username. Press Enter.
Deleting serial port access for a user
The Delete PortFromUser command removes a user’s access to the serial port. You cannot remove access to
the serial port for an administrative level user.
To delete serial port access for a user:
At the AmpMeter PDU: prompt, type delete portfromuser console and a username. Press Enter.
Page 24 - 301-0399-3 Rev A.