American Power Conversion AP9215 PowerView Information and Configuration, Beeper Settings

PowerView Information and Configuration

νSet current date and time (used for log entries)

νPassword – when a non-null password is configured, all control and configuration functions provided by PowerView will require the user to enter the password. The default from the factory is no password.

￿Set password – press enter and use the and keys to set a character string of up to 8 characters. The underscore ( _ ) character is used to indicate the end of a password that is less than 8 characters in length. Setting the first character of the password to underscore disables password protection. Allow- able characters are: A-Z, 0-9,/, space.

￿Password timeout – a period of user inactivity greater than this value will require re-entry of the password. The length of inactivity before PowerView reverts to the default data screen is also determined by this setting.

￿Invalidate (timeout) the password immediately – any sucessive attempt at control or configuration functions will require entering the password.

νInformation about PowerView

￿Model Number

￿Serial Number

￿Manufacture Date

￿Hardware and Firmware Revision Levels

νBeeper Settings

￿At UPS – condition when the UPS will beep

￿At Display – condition when PowerView will beep

￿Beeper Volume

￿Key click on/off

νContrast – adjust for optimum viewing of display.

13