6 990-5518 03/02
Installing Batteries
Ensure that the battery breaker is in the OFF position during battery installation.
The batteries fit into a battery tray that is installed on the top shelf of the enclosure.
The Thermal Switch provides temperature control during battery charge. Place the Thermal Switch at
the top of the batteries.
Install the batteries with the polarities oriented properly. See figure below.
Battery #1 Battery #2 Battery #3
Batter
y
Breaker Switch
Thermal Switch
3: Red Jumper
1: Red Lead from Harness
2: Black Lead from Harness
4: Black Lead
5: Red
Lead