American Power Conversion SUA48RMXLBP3U Introduction, Specifications, About this Unit, Unpack

Introduction

About this Unit

The SUA48RMXLBP3U connects to the APC Smart-UPS XL.Together these units provide extended protection from utility power blackouts, brownouts, sags and surges from reaching your electronic equipment.

Unpack

Read the Safety Guide before installing the unit. The User Manual and Safety Guide are accessible on the supplied User Manuals CD and on the APC Web site, www.apc.com.

Inspect the unit upon receipt. Notify the carrier and dealer if there is damage.

The packaging is recyclable; save it for reuse or dispose of it properly. Check the package contents:

•External Battery Pack with two battery modules installed

•Bezel

•Rail kit

•External Battery Pack literature kit containing:

–Two brackets

–Eight flathead screws

–Product documentation

–Smart-UPS® User Manuals CD

–Safety information

–Warranty information

The model and serial numbers for all units are located on the rear panel. See the small label with numbers and bar codes.

Specifications

Temperature	32° to 104° F (0° to 40° C)	This unit is designed for indoor
Operating		use only. Select a location sturdy
Storage	5° to 113° F (-15°to 45° C) charge the battery module(s) every six	enough to handle the weight.
	months	Do not operate this unit where
Maximum		there is excessive dust or the
Elevation		temperature or humidity are
Operating	10,000ft (3,000m)	outside the specified limits.
Storage	50,000ft (15,240m)
Humidity	0 to 95% relative humidity, non-condensing
Weight	150 lbs (68 kg) with battery module	150 lbs (68 kg)
	40 lbs (18 kg) without battery module
	55 lbs (25 kg) each battery module
Maximum Number of External Battery Packs Supported by the		10
Smart-UPS XL

SUA48RMXLBP3U External Battery Pack User Manual 3