American Standard 0615.000 dimensions Rattan Undercounter Sink, Unglazed Rim, Bowl Size

RATTAN™

UNDERCOUNTER SINK

VITREOUS CHINA

RATTAN UNDERCOUNTER SINK

•Made from vitreous china

•Unglazed rim

•Front overflow

•Luxurious style designed for solid surface counters

•Features delicate basketweave pattern designed into an undercounter lavatory, creating an intriguing complexity.

•16" x 12" Rectangle Bowl

•Center drain

•Fits standard rectangle openings

•Vitreous China construction provides durability and easy cleaning

•Supplied with undercounter mounting kit and template

❏0615.000 Unglazed Rim

18-3/4" x 14-5/16" (467 x 364mm )			A	B	FINISHED WALL
					OR SPLASHBACK
	51mm
Bowl Size:	(2) MIN.
	71mm
16" (406mm) wide,
	(2-13/16)
12" (305mm) front to back,					183mm
6" (152mm) deep	COUNTER				(7-3/16)
	EDGE OF
	TOP	406mm
		(16)
	CUTOUT				305mm
Compliance Certifications -
					(12)
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures				406mm
• CAN/CSA B45 series	40mm
				(16)
	(1-9/16)			514mm
				(20-1/4)
					COUNTERTOP
		SEALING		11mm	(BY OTHERS)
		COMPOUND		(7/16)
						▼DETAIL OF MOUNTING CLIP
	*330mm	203mm				(KIT No.47194.07)
						BRASS	19mm
To Be Specified	(13)	(8)
			27mm				(3/4) MIN.
	*273mm					INSERT
❏ Color: ❏ White			(1-1/16)		LAVA
	(10-3/4)
❏ Faucet*:				203mm
❏ Faucet Finish:				(8)			CLIP
							MACH.
❏ Supplies:					SUPPLIES		SCREW
	864mm		1-1/4 O.D.			REFER TO INSTRUCTIONS
❏ 1-1/4" Trap:					AS REQ'D.
	(34)		WASTE			PROVIDED WITH KIT FOR
			1-1/4 O.D.			ADDITIONAL INFORMATION
			TAILPIECE
* See faucet section for additional models available				FINISHED FLOOR
				FITTING	A	B
				CENTERSET 27mm(1-1/16)		102mm(4)
				SPREAD	32mm(1-1/4)	203mm(8)

NOTES:

WE RECOMMEND USING BASIN AS A TEMPLATE TO DETERMINE PROPER CONTOUR. CUT COUNTERTOP 38MM (1-1/2”) INSIDE BASIN CONTOUR.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIED AND “P” TRAP ARE SUGGESTED.

▼ UNDERCOUNTER MOUNTING KIT SUPPLIED WITH SINK.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

	J49
© 2008 AS America Inc.		Revised 2/08