American Standard 2023.214 warranty Champion Round Front Toilet, Champion 4 Round Front Toilet

CHAMPION® 4

ROUND FRONT TOILET

VITREOUS CHINA

CHAMPION® 4 ROUND FRONT TOILET

❑2023.214

•Vitreous china

•EverClean® surface inhibits the growth of stain- and odor-causing bacteria, mold, and mildew on the surface

•Low-consumption (6.0 Lpf/1.6 gpf)

•Features Champion® 4 Flushing System performance platform

•4" non-adjustable, piston action Accelerator™ flush valve

•Siphon action jetted bowl

•2-3/8" fully-glazed trapway

•Speed Connect® tank/bowl coupling system

•Chrome-plated trip lever

•Sweeping pier on bowl

•100% factory flush tested

•2 bolt caps

•10 year warranty

❑3110.016 Bowl

❑4266.014 Tank

Nominal Dimensions:

721x 464 x 797mm (28-3/8" x 18-1/4" x 31-3/8") Fixture only, seat and supply by others

Alternate Tank Configurations Available:

❑4266.504 Tank complete with Aquaguard Liner

❑4266.604 Tank complete with tank cover locking device

❑4266.704 Tank complete with Aquaguard Liner and tank cover locking device

❑4266.804 Tank complete with trip lever located on right side

❑4266.904 Tank complete with tank cover locking device and trip lever located on right side

❑4266.954 Tank complete with Aquaguard Liner, tank cover locking device, and trip lever

on right side

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

•Los Angeles Department of Water and Power Supplementary Purchase Specification for Non-Adjustability - July, 2003 revision

SEE REVERSE FOR ADDITIONAL ROUGHING-IN DIMENSIONS

To Be Specified:

❏Color:

❏White ❏ Bone ❏ Silver ❏ Linen ❏ Black

❏Seat: (please specify color)

❏Champion® Slow Close Round Front #5330.010

❏Rise & Shine Round Front #5322.011

❏EverClean® Round Front Seat with Slow Close Snap-Off Hinges #5320.110

❏Supply with stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

*DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

	K37
© 2008 AS America Inc.		Revised 2/08