NetComm NP3024 manual Features

Features

■Depending on your model, either 16 or 24×10/100/1000Mbps Auto-negotiation Gigabit Ethernet ports

■All RJ45 ports support auto MDI/MDIX, so there is no need to use cross-over cables or an up- link port

■Full/half duplex transfer mode for 10/100Mbps port

■Full duplex transfer mode for Gigabit port

■Wire speed reception and transmission

■Store-and-Forward switching scheme capability to support rate adaptation and ensure data integrity

■Up to 4K unicast addresses entities per device, self-learning, and table aging

■272KBytes packet buffer

■Supports IEEE 802.3x flow control for full-duplex mode ports

■Supports port-base VLAN

■Supports port-base QoS

■Supports Trunking

■Supports Port-mirroring

■Supports Port-setting for Speed/Disable, Flow control

■Easy configuration via WEB Browser

■Easy setting via Web Management Utility

■Standard 19” Rack-mount size

YML711 Rev1	NetComm 16 or 24 port Gigabit Switch
www.netcomm.com.au	7