Set Password
The Set Password screen allows the network manager to secure the Switch settings. Use this screen to change the password.
If you forget the password, you can press the “Reset” button in the rear panel of the Switch to restore the Switch to its factory default settings.
Note: | All other settings will also be lost, including VLAN, Port Settings, etc. Refer |
| to Backup Setting to back up your settings before restoring the Switch to its |
| factory default. |
|
|
Figure 27. Set Password
NetComm 16 or 24 port Gigabit Switch | YML711 Rev1 |
32 | www.netcomm.com.au |
