Rear Panel
|
| Figure 4. Rear panel of the Switch |
Power Switch: |
| The Power Switch controls the power to the unit and can |
|
| be turned on after the power cable is connected. |
AC Power Connector: | This is a | |
|
| power cord. Plug in the female connector of the provided |
|
| power cord into this connector, and the male into a |
|
| power outlet. Supported input voltages range from 240V |
|
| AC at 50Hz. |
Reset: |
| The Reset button will restore the unit to its factory |
|
| defaults. |
|
| |
Note: | Be sure that you record your Switch’s settings before pressing the Reset | |
| button, as any changes to the default will be lost. | |
|
|
|
NetComm 16 or 24 port Gigabit Switch | YML711 Rev1 |
12 | www.netcomm.com.au |
