NetComm NP3024 manual Identifying External Components, Front Panel

Chapter 3: Identifying External Components

This chapter describes the front panel, rear panel, and LED indicators of the Switch.

Front Panel

The figure below shows the front panels of the 16-Port Switch and the 24-Port Switch.

Front panel of 16-port Gigabit Ethernet Switch

	Front panel of 24-port Gigabit Ethernet Switch
LED Indicator:	Comprehensive LED indicators display the status of the
	switch and the network (see the following LED Indica-
	tors section).

Gigabit Ethernet Ports (1~16 or 1~24):

Depending on which model you have purchased, the Switch has 16 or 24 Gigabit twisted pair ports, supported auto negotiable 10/100/1000Mbps and auto MDI/MDIX crossover detection function. This supplies true “plug and play” capability. These ports operate in half-duplex mode for 10/100Mbps and full- duplex mode for 10/100/ 1000Mbps.

Note:	When the port is set to “Forced Mode”, the Auto MDI/MDIX feature will be
	disabled.

YML711 Rev1	NetComm 16 or 24 port Gigabit Switch
www.netcomm.com.au	11