NetComm NP3024 manual Vlan Settings Virtual Local Area Network, Vlan Group Settings

Speed/Disable:	This field has six settings—100M Full, 100M Half, 10M
	Full, 10M Half, Auto and Disable—to control speed or
	port disable selections.
Flow Control:	This setting determines whether or not the Switch will be
	handling flow control. Set Flow Control to Enable to
	avoid data transfer overflow. Sets Flow Control to
	Disable if you do not require flow control or if this is
	controled by another hardware/software management
	device.
	When the port is set to forced mode, then the flow
	control will automatically set to Disable.
QoS:	In ports that require a high priority to manage the data
	transfer, QoS should be set to high. Set the QoS to
	Normal for ports that do not need to have a high priority
	for transferring data.

VLAN Settings (Virtual Local Area Network)

Group individual ports into a small “Virtual” network of their own to be independent of the other ports. To add a VLAN group, press the “Add Group” button.

Figure 19. VLAN Group Settings

The new VLAN Setting configuration window will be displayed. Select the ports you wish to group together and give them a description name. Once you want to modify the VLAN Group, check on the ID parameter, the ID VLAN configuration window will be displayed.

NetComm 16 or 24 port Gigabit Switch	YML711 Rev1
26	www.netcomm.com.au