American Standard 2073.014 warranty FloWise ELONGATED TOILET, Tank, Compliance Certifications

FloWise® 1.28 ELONGATED high efficiency TOILET

FloWise® 1.28

ELONGATED TOILET

VITREOUS CHINA

❑2073.014

•Vitreous china

•Meets definition for HET (High Efficiency Toilet) – 20% less water usage than 1.6 gpf

•High efficiency (4.8 Lpf/1.28 gpf)

•EverClean® surface inhibits the growth of stain- and odor-causing bacteria, mold, and mildew on the surface

•4" non-adjustable, piston action Accelerator™ flush valve

•Elongated siphon action jetted bowl

•2-1/8" fully-glazed trapway

•Speed Connect® tank/bowl coupling system

•Chrome-plated trip lever

•Sanitary Dam on bowl

•100% factory flush tested

•2 bolt caps

•10 year warranty

❑ 3018.013 Elongated Bowl

❑4023.014 Tank

Nominal Dimensions: 762 x 438 x 794mm (30" x 17-1/4" x 31-1/4")

Fixture only, seat and supply by others

FINISHED WALL

762mm

19mm ± 6mm (30) (3/4 ± 1/4)

222mm

(8-3/4)

470mm

(18-1/2)

C/L OF SEAT POST HOLES

140mm (5-1/2 CENTERS)

438mm (17-1/4)

C/L

SUPPLY

AS794mm

REQ'D(31-1/4)

Compliance Certifications -

83mm (3-1/4)

381mm

(15)

356mm

203mm (14)

Meets or Exceeds the Following Specifications:

• ASME A112.19.2M for Vitreous China Fixtures -

includes Flush Performance, Ball Pass Diameter,

Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and Power

Supplementary Purchase Specification for

	16mm
	(5/8)
254mm	343mm
(10)	(13-1/2)	FINISHED
305mm		FLOOR
	C/L OF OUTLET
(12)

(8)

114mm (4-1/2)

267mm (10-1/2)

Non-Adjustability

• Certified in EPA WaterSense HET program

• Qualifies in LEEDS Programs

To Be Specified:

❏Color:

❏White

❏Seat: (please specify color)

❏Slow Close Elongated #5325.010

❏Rise & Shine Elongated #5324.019

❏EverClean® Elongated Seat with Slow Close Snap-Off Hinges #5321.110

❏Supply with stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

*DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

Certified by

IAPMO R&T

	K39
© 2008 AS America Inc.		Revised 2/08