Liebert XDV8 specifications | Emerson Xtreme Density

						Specifications
Table 36 Liebert XDV8 specifications

	XDV8BK--; XDV8DK--
	XDV8BKP-; XDV8DKP-		XDV8BT--; XDV8DT--			XDV8BS--; XDV8DS--
	XDV8BK-E; XDV8DK-E		XDV8BTP-; XDV8DTP-			XDV8BSP-; XDV8DSP-
	XDV8BKPE*;		XDV8BT-E; XDV8DT-E			XDV8BS-E; XDV8DS-E
	XDV8DKPE*		XDV8BTPE; XDV8DTPE			XDV8BSPE; XDV8DSPE
	XDV8BKR-; XDV8BKRE		XDV8BTR-; XDV8BTRE			XDV8BSR-; XDV8BSRE
	XDV8DKR-; XDV8DKRE		XDV8DTR-; XDV8DTRE			XDV8DSR-; XDV8DSRE
Models	60 Hz		60 Hz	50 Hz		50 Hz
Cooling Capacity	Nominal (98°F [37°C] EAT): 8.8kW / 2.5 Tons			Nominal (98°F [37°C] EAT): 8kW/ 2.3 Tons
Cooling Capacity	Maximum (95°F [35°C] EAT): 8.8kW / 2.5 Tons			Maximum (103°F [39°C] EAT): 8.8kW/2.5Tons
	Maximum (95°F [35°C] EAT): 8.8kW / 2.5 Tons			Maximum (103°F [39°C] EAT): 8.8kW/2.5Tons
Conditions	Capacity rating is @ 55ºF (13ºC) Entering Fluid Temperature and
Conditions		50ºF (10ºC) or lower dew point, rear air inlet.
		50ºF (10ºC) or lower dew point, rear air inlet.
Electrical Requirements
Input	120V model: 1ph-60 Hz		230V model: 1ph-60 Hz	230V model: 1ph-50 Hz

Input power connections			2 power connections, each model

Full Load Amps	120V model: 2.0A			230V model: 1.0A
Power consumption,	180		190	190		190
nominal, watts	180		190	190		190
nominal, watts
Dimensions, inches (mm)
Height – unit only			14 (355) not including pipe connections

Height – including pipe		18-5/8 (473)
connections		18-5/8 (473)
connections
Width		22-7/8 (581)

Depth – Top		39-1/2 (1003)

Depth – Bottom		29-5/8 (752)
Weight, lb (kg)
Unit only		77 (35)

Shipping weight		125 (57)
Installed, with		79 (36)
refrigerant		79 (36)
refrigerant
Number of Fans	2		2	2		2
Airflow, Nominal,	1000 (1699) with rear inlet. Bottom inlet airflow may			833 (1415) with rear inlet. Bottom inlet airflow
Airflow, Nominal,	1000 (1699) with rear inlet. Bottom inlet airflow may			may be less, depending on restrictions inside
ft3/ min (m3/ hr)	be less, depending on restrictions inside cabinet					cabinet
						cabinet
Audible noise	78 dBa sound power				73 dBa sound power
Pipe Connections (without Liebert Flex Pipe)
Refrigerant Supply
from Liebert	1/2" OD Cu, (optional 1/2" threaded coupler flex piping)
XDP/Liebert XDC
Refrigerant Return
to Liebert XDP/Liebert	5/8" OD Cu, (optional 3/4" threaded coupler flex piping)
XDC
Serviceable Parts			Fans and electrical components
Cabinet Exterior			Black, matte finish, heat-fused powder coat
Finish			Black, matte finish, heat-fused powder coat
Finish
Options
Condensate sensing			Dry contact outgoing signal
(factory-installed)			Dry contact outgoing signal
(factory-installed)
Pre-Charged			R-134a Refrigerant, one-shot connections
Agency
Approvals	CSA 60Hz			CSA 50Hz		CE 50Hz

* = Revision level of unit

Emerson Xtreme Density manual Liebert XDV8 specifications

Models: Xtreme Density

Table 36 Liebert XDV8 specifications