Emerson Xtreme Density manual Liebert Xdcf Mechanical Considerations, Liebert TM, Return Pipe

Liebert XD Cooling Modules—Liebert XDO, Liebert XDV, Liebert XDH and Liebert XDCF

4.4Liebert XDCF Mechanical Considerations

The Liebert XDCF is engineered to fit on the rear of the Egenera BladeFrame enclosure. Figure 40 illustrates the unit’s dimensions and the location of pipes. Figure 41 shows the attachment positions of each module.

Figure 40 Overall dimensions

		TIGHTEN FLEX PIPE
		TO UNIT WITH THE
	RE TURN	SCHRADE R VALVE
		IN THIS POSITION
R-134a	ONCE FLE X PIPE CONNECTIONS
	ARE MADE TO THE UNIT DO NOT
	DISASSEMBLE FROM THE UNIT .
	REMOVE CONNECTIONS FROM
	CEILING HEADERS BY TURNING
	THE SUPPLY VALVE TO THE
	OFF POSITION AND THEN TURNING
	THE RETURN VALVE TO THE OFF
	P OSITION THE HEADER
	CONNECTIONS MAY BE REMOVED.
	S UPPLY	TIGHTEN FLEX PIPE
		TO UNIT WITH THE
		SCHRADE R VALVE
	1194311 P1	IN THIS POSITION
		TOP

13-7/16" (341mm)

7-5/16" (186mm)

1-7/16" (37mm)

3-9/16" (90mm)

1-7/16" (37mm)

Upper unit shown;

both upper and lower units have

same dimensions RIGHT SIDE

Piping is not load-bearing and should never be used to lift or move the Liebert

XDCF

3-9/16" (90mm)

Return

Pipe

EMERSON

NETWORK POWER

Liebert TM

XD

31-3/8" (797mm)

BACK

41