Features the Cadet 3 Flushing System | American Standard 2386.010

CADET® 3 RIGHT HEIGHT™ 10"

Rough-in ELONGATED TOILET

VITREOUS CHINA

ELONGATED TOILET

	❑ 2386.010
	• Vitreous china
	• Low-consumption (6.0 Lpf/1.6 gpf)
	• EverClean® surface inhibits the growth of
	stain- and odor-causing bacteria, mold,
	and mildew on the surface
	• Features the Cadet® 3 Flushing System
	• 16-1/2" rim height for accessible application
	• Elongated siphon action jetted bowl
	• Fully-glazed 2-1/8" trapway with 2" ball pass
	• Generous 9" x 8" water surface area
	• Close-coupled tank with flat tank cover for
	superior storage
	• Oversized 3" flush valve with chemical
	resistant flapper
	• Chrome trip lever
	• Speed Connect® tank-to-bowl coupling system
	• Sanitary dam on bowl with four point	SEE REVERSE FOR ADDITIONAL ROUGHING-IN
	tank stabilization	SEE REVERSE FOR ADDITIONAL ROUGHING-IN
	• 2 color-matched bolt caps	DIMENSIONS
	• 100% factory flush tested
	• 5 year warranty
	❑ 3016.016 Right Height™ Elongated Bowl	To Be Specified:
	❑ 3016.016 Right Height™ Elongated Bowl	❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black
	❑ 4019.016 Tank	❏ Seat: #5325.010 Elongated Champion® Slow Close
		solid plastic seat and cover with easy lift off feature
	Nominal Dimensions:	❏ Seat: #5284.016 Elongated EverClean® solid plastic
	Nominal Dimensions:	seat and cover
	724 x 432 x 768mm	seat and cover
	724 x 432 x 768mm	❏ Seat: #5321.110 EverClean® Elongated Seat with
	(28-1/2" x 17" x 30-1/4")	Slow Close Snap-Off Hinges
		Slow Close Snap-Off Hinges
	Fixture only, seat and supply by others	❏ Supply with stop:
	Fixture only, seat and supply by others

❑4019.600 Tank complete with tank cover locking device

❑ 4019.800 Tank complete with trip lever on right side

❑4019.900 Tank complete with tank cover locking device and trip lever on right side

•ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

•Los Angeles Department of Water and Power Supplementary Purchase Specification for Non-Adjustability

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

*DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES.

K57

Revised 2/08