American Standard 2393.202 ICH dimensions Princeton Recess Bath With Integral Overflow

PRINCETON™ RECESS BATH

WITH INTEGRAL OVERFLOW

BARRIER FREE AMERICAST® BRAND ENGINEERED MATERIAL

PRINCETON™ RECESS BATH W/ INTEGRAL OVERFLOW for Above Floor Rough Installation Americast® brand engineered material

❏2392.202 ICH (Chrome Trim) Left Hand Outlet for above floor installation

❏2392.202 ICHTC Same as above with Tub Cover

❏2393.202 ICH (Chrome Trim) Right Hand Outlet for above floor installation

❏2393.202 ICHTC Same as above with Tub Cover

❏2392.202 IPB (Polished Brass Trim) Left Hand Outlet

❏2392.202 IPBTC Same as above with Tub Cover

❏2393.202 IPB (Polished Brass Trim) Right Hand Outlet

❏2393.202 IPBTC Same as above with Tub Cover

❏2392.202 IBS (Brushed Satin Trim) Left Hand Outlet

❏2392.202 IBSTC Same as above with Tub Cover

❏2393.202 IBS (Brushed Satin Trim) Right Hand Outlet

❏2393.202 IBSTC Same as above with Tub Cover

•Lift and turn drain stopper assembly included with bath

•Escutcheon included and installed on bath

•Acid resistant porcelain finish

•Recess bath with integral apron and

tiling flange

•Integral lumbar support

•Beveled headrest

•Full slip-resistant coverage

•End drain outlet

Nominal Dimensions:

Photograph details integral overflow and drain assembly. Drain assembly included with bath.

To Be Specified:

❏Color:

❏Bath Filler: (specify finish)

❏Bath Drain: 1583.470 (specify finish)

To Be Specified - Optional:

❏Pressure Test Kit†: 791363-0070A

*See faucet section for additional models available

1524 x 762 x 445mm (60" x 30" x 17-1/2")

Bathing Well Dimensions: 1423 x 635 x 337mm

(56" x 25" x 13-1/4")

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•ASME A112.19.4 for Americast Plumbing Fixtures

•ASTM F-462 for Slip-resistant Bathing Facilities

•ANSI Z124.1 Ignition Test

•ASTM E162 for Flammability

•NFPA 258 for Smoke Density

© 2008 AS America Inc.

†Pressure Test Kit is necessary to seal overflow and perform system pressure test.

Americast® brand engineered material is a composition of porcelain bonded to enameling grade metal, bonded to a patented structural composite.

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USEABLE BUILDING FACILITIES-CHECK LOCAL CODES. INSTALL WITH SEAT AT HEAD END.

SEE REVERSE FOR PRODUCT DIMENSIONS AND SPECIFICATIONS

H115

Revised 2/08