American Standard 2460.XXXW Series installation instructions Thank YOU

CAMBRIDGE™

AMERICAST BRAND ENGINEERED MATERIAL

2460.XXXW SERIES 2461.XXXW SERIES WHIRLPOOL/BATHING POOL

INSTALLATION INSTRUCTIONS

				1524mm
			203mm	(60)
	19mm				70mm
			(8)	FINISHED
					(2-3/4)
	(3/4)			WALL			SERVICING ON ALL INSTALLATIONS
						PROVIDE ACCESS TO PUMP FOR
406mm		102mm			PUMP
(16)
		(4)
				229mm x 305mm
				(9 x 12)
	102mm			FLOOR
				CUTOUT
	(4)
813mm					ON / OFF
(32)					SWITCH
	60mm+13mm
	(2-3/8)+(1/2)
			25mm	64mm
C/L OF 1/2			(1)	(2-1/2)
			C/L OF
SUPPLIES
			DRAIN
AS REQ'D

SHOWER ARM- 1/2 N.P.T. 32mm(1-1/4) DIA. HOLE

C/L OF CURTAIN ROD		711mm
USUALLY 1930mm(76) FROM
	(28)
FINISHED FLOOR

							FINISHED
	C/L OF	(2) 54mm(2-1/8)			102mm		WALL
	VALVES				(4)
		DIA. HOLES
OPTIONAL			102mm		SPOUT-
TO FLOOR		102mm
	406mm			(4)	1/2 N.P.T.		SAFE-T-HEATER
USUALLY		(4)
	(16)				76mm
BETWEEN							REMOVABLE BLANK
1651 & 1981mm					(3)
(65 & 78)	24mm					■
	(15/16)					SEE	441mm
	451mm
						NOTE
							(17-3/8)
	(17-3/4)
						70mm
						(2-3/4)
							ROUGH
		117mm					FLOOR
					1-1/2 N.P.T. THREADS
		(4-5/8)
					1-1/2 O.D. TAILPIECE

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool.

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

List of Optional Components (not included):

• Safe-T-Heater 9075.120*

*see your American Standard Distributor

List of Required Components (not included):

•Drain 1583.470*

•Bath Filler*

* see your American Standard Distributor

GENERAL SPECIFICATIONS FOR 2460/2461 WHIRLPOOL

INSTALLED SIZE		60 x 32 x 17-3/4 In. (1524 x 813 x 451mm)
WEIGHT					190 Lbs. (86 Kg.)
WEIGHT w/WATER					607 Lbs. (273 Kg.)
GAL. TO OVERFLOW							50 Gal. (190 L)
WHIRLPOOL MIN. OPERATING VOL.							39 Gal. (148 L)
BATHING WELL AT SUMP				41 x 20 In. (1041 x 508mm)
BATHING WELL AT RIM				54 x 26 In. (1372 x 660mm)
WATER DEPTH TO OVERFLOW							14 In. (356mm)
FLOOR LOADING			46 Lbs./Sq.Ft. (220 Kgs./Sq.m)
(PROJECTED AREA)
PTS.								15.6
CUBE (FT3)									31.5
	WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP				1.6 HP, 9.7 AMPS,120V.
SAFETY HEATER						12 AMPS, 120V.

GENERAL INSTALLATION INFORMATION

List of Required Tools and Supplies:

Tools		Supplies
•	Level	•	Nails
•	Tape Measure	•	Putty
•	Pipe Wrench	•	Caulking (waterproof)
•	Slip Joint Pliers	•	1 x 3 or 2 x 4
•	Screw Driver		Stringers
•	Standard	•	Drop Cloth
	Woodworking Tools	•	15 amp GFCI
•	Personal Safety		Outlet
	Equipment	•	Cement, Plaster,
•	Caulking Gun		Grout

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

© American Standard Inc. 2003

791033-100 Rev. IAll product names listed herein are trademarks of American Standard Inc. unless otherwise noted.