American Standard 2471 installation instructions CenterSet Faucet, Installation Instructions

Installation

Instructions

T H E	2471
C O L L E C T I O N™

by

CenterSet Faucet

Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.

To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.

Certified to comply with ASME A112.18.1M Certifié ASME A112.18.1M

M 9 6 8 2 8 6

TOOLS REQUIRED

Channel Locks Adjustable Wrench Basin Wrench Tubing Cutter Plumbers' Putty or Caulking

1 INSTALL FAUCET

CAUTION

Turn off hot and cold water supplies before beginning.

Apply a bead of PUTTY along the edge of the underside of the BODY (1). Insert LIFT ROD (2) through hole in BODY (1).

Insert faucet SHANKS through holes of SINK. Place faucet as far forward as possible.

2

1 SHANK

PUTTY

2	SECURE FAUCET AND MAKE WATER
	SUPPLY CONNECTIONS

Secure FAUCET (1) with ATTACHMENT NUTS (2) supplied. (HAND TIGHTEN).

NOTE: FLEXIBLE SUPPLIES OR BULL-NOSE RISERS MUST BE PURCHASED SEPARATELY.

Connect water supply to FAUCET (1) with 1/2" IPS FLEXIBLE SUPPLIES (3) or 3/8" O.D. BULL-NOSE RISERS (4). Use adjustable wrench to tighten connections. Do not over tighten. Be careful not to kink copper supply when bending. Use tubing cutter to cut to proper length.

2

(HAND TIGHTEN)

	1
3	COUPLING NUT

4

SINK

FERRULE