American Standard 2555.034, 2555.061 installation instructions Townsquare, Accessories, 2555.018

Models: 2555.061

1 3
Download 3 pages 59.9 Kb
Page 1
Image 1
TOWNSQUARE

TOWNSQUARE

ACCESSORIES

18"TOWEL BAR

24"TOWEL BAR

24"TOWEL BAR WITH GLASS SHELF TOILET TISSUE HOLDER
Installation Instructions

2555.018

2555.024

2555.034

2555.061

Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.

To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.

Certified to comply with ANSI A112.18.1

M 9 6 8 2 3 2 C

Recommended Tools

Regular Screwdriver

10'

Drill

 

Tape Measure

Phillips Screwdriver

 

CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.

1

18" TOWEL BAR, 24" TOWEL BAR, 24" TOWEL BAR W/GLASS SHELF AND

TOILET TISSUE HOLDER MOUNTING & INSTALLATION

The 18" TOWEL BAR (1), 24" TOWEL BAR (2), 24" TOWEL BAR W/GLASS SHELF (3) and TOILET TISSUE HOLDER (11) work best if secured to a wall stud or cross brace within the wall, using the SCREWS (4) supplied.

If the 18" TOWEL BAR (1), 24" TOWEL BAR (2), 24" TOWEL BAR W/GLASS SHELF (3) and TOILET TISSUE HOLDER (11) are to be installed on a tile or plaster wall the ANCHORS (8) and SCREWS (4) should be used.

Determine desired height and location (optional) and mark a center line. For the 24" TOWEL BAR (2) and 24" TOWEL BAR W/GLASS SHELF mark a centerline 24" horizontally from the first location. For the 18" TOWEL BAR (1) mark a centerline 18" from the first location. For the TOILET TISSUE HOLDER (11) mark a centerline 7" from the first location. Using the MOUNTING PLATE (5) as a template mark the two spots for the mounting holes. Repeat for the other MOUNTING PLATE (5). If MOUNTING PLATE (5) is secured to a stud or cross brace drill small pilot holes for SCREWS (4).

For installations on drywall, use DRYWALL ANCHOR (6) and SCREWS (4) for securing MOUNTING PLATES (5) to wall. Place #2 Phillips screwdriver or cordless screwdriver into recess of anchor. Press into drywall while turning the anchor clockwise until it is seated flush with the wall. Place MOUNTING PLATES (5) over DRYWALL ANCHORS (6) and insert screws provided with #2 Phillips screwdriver. See illustration below. Secure MOUNTING PLATES (5) to wall with SCREWS (4).

For installations on tiled walls, If TILE ANCHORS (8) and SCREWS (4) are used for securing MOUNTING PLATE (5), then

drill two 1/4" diameter holes a minimum of 1-1/4" deep. Insert the two TILE ANCHORS (8) flush with face of the finished wall.

Secure MOUNTING PLATES (5) to wall with SCREWS (4).

2 INSTALL 18" TOWEL BAR, 24" TOWEL BAR, 24" TOWEL BAR W/ GLASS SHELF AND TOILET TISSUE HOLDER

Place ESCUTCHEON (7) onto MOUNTING BRACKET (5), and secure with ATTACHMENT SCREW (20).

For the 24" TOWEL BAR W/ GLASS SHELF (3), Install TOWEL BAR (16) into bottom of HANGER ROD POSTS (17). Align SET SCREW (19) in back of LEFT HANGER ROD POST (17) with hole in TOWEL BAR (16). Tighten SET SCREW (19) to restrict rotation of TOWEL BAR (16). Install the SQUARE WASHER (12), WASHER (14), GLASS SHELF (15), WASHER (14) and SQUARE WASHER (12) onto HANGER ROD POST (17). Install and tighten SCREWS (18). See illustration.

Install the 18" TOWEL BAR (1), 24" TOWEL BAR (2), 24" TOWEL BAR W/ GLASS SHELF (3) into WALL ESCUTCHEON (7).

Tighten SET SCREW (9) using 2-1/2mm HEX KEY (10) supplied to secure accessory assembly to WALL ESCUTCHEON (7).

18

USE MOUNTING BRACKET (5) AS TEMPLATE

FINISHED WALL

14

12

 

6 8

8

5 4

5

4

7

 

 

15

 

1

2 11

14

 

12

 

 

 

 

9

20

17

 

SET

 

 

SCREW

 

 

 

10

19

16

 

 

3

Page 1
Image 1
American Standard 2555.034, 2555.061 installation instructions Townsquare, Accessories, 2555.018, 18TOWEL BAR 24TOWEL BAR