American Standard 2589, 2587, 2588, 2579 Repair Parts List, Care and Cleaning, Adjustments

10
TOP	ARM	REFILL
	NIPPLE
		TUBE
	TANK
CRITICAL LEVEL	LEVER
MARK ("C.L.")
MUST BE
1" ABOVE
OVERFLOW PIPE	FLOAT
	CUP
FILL
VALVE
		FLUSH
		VALVE
VALVE
BODY	WATER LEVEL
	ADJUSTMENT
	ROD
ADJUSTABLE
HEIGHT	FLAPPER
	SHANK
	WASHER
LOCK NUT	THREADED
	SHANK
CONE WASHER
	PARTS FOR WATER
COUPLING NUT	CONNECTION
	(SEE STEP 9)
(HAND TIGHT ONLY)
		Diagram 1

ADJUSTMENTS

a.Adjust water level. Water level should be adjusted to level indicated on tank by adjusting float cup.

See Step 11 for water level adjustment method

b.If bowl fails to siphon, an adjustment may be required with the lift chain. Simply remove the bead chain from the retainment clip and take up slack on the chain, and reinsert on lift rod. Make sure the chain is not too taught.

11

Turn on water supply. Submerge the FLOAT CUP under the water for 30 seconds. Adjust the water to desired level by turning

WATER LEVEL ADJUSTMENT ROD and moving FLOAT CUP up or down.

12CARE AND CLEANING

When cleaning your toilet, wash it with mild, soapy water, rinse thoroughly with clear water and dry with a soft cloth. Avoid detergents, disinfectants, or cleaning products in aerosol cans. NEVER use abrasive scouring powders or abrasive pads on your toilet seat. Some bathroom chemicals and cosmetics may damage the seat's finish.

!WARNING: Do not use in-tank cleaners. Products containing chlorine (calcium hypochlorite) can seriously damage fittings in the tank. This damage can cause leakage and property damage.

American Standard shall not be responsible or liable for any tank fitting damage caused by the use of cleaners containing chlorine (calcium hypochlorite).

	REPAIR PARTS LIST			TANK NUMBER
Repair parts are determined by toilet tank number which can be found marked inside tank.			4202.016		4202.500	4202.128	4202.513
NOTE: "XXX" represents color or trim finish options. Specify when ordering.
PART NO.		DESCRIPTION
7381031-XXX0A		TRIP LEVER - STANDARD LEFT HAND	✔		✔	✔	✔
034783-XXX0A		BOLT CAP KIT	✔		✔	✔	✔
738565-423.0070A		FLUIDMASTER 400A VALVE	✔		✔	✔	✔
738921-100.0070A		FLUSHVALVE ASSEMBLY - 3 INCH (INCLUDES FLAPPER)	✔		✔
738920-100.0070A		FLAPPER ASSEMBLY - 3 INCH	✔		✔
7301021-0070A		TANK COUPLING KIT #253	✔		✔	✔	✔
738916-100.0070A		REFILL TUBE - 5 INCH	✔		✔	✔	✔
735134-400-XXX0A		TANK COVER - 12" ROUGH	✔		✔	✔	✔
738921-103.0070A		FLUSHVALVE ASSEMBLY (HET) - 3 INCH (INCLUDES FLAPPER)				✔	✔
7381026-400.0070A		FLAPPER ASSEMBLY (HET) - 3 INCH				✔	✔

- 3 - 7301371-100 Rev. A