American Standard 2645 Series installation instructions Series Whirlpool/Bathing Pool, Thank You

SCALA™ 5-1/2

HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS

2645 SERIES

WHIRLPOOL/BATHING POOL

INSTALLATION INSTRUCTIONS

302mm
(11-7/8)
	1676mm
	(66)
●RECOMMENDED FITTING LOCATION		6mm
64 X 330mm (2-1/2" x 13")
		(1/4)
HAND SHOWER	OUTLINE OF CUTOUT
		TYP.
LOCATION
	1626mm X 864mm
51mm		25mm (1)
	(64 X 34)
(2)		TYP.
914mm		ON/OFF
		SWITCH
(36)
	PUMP

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool.

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

List of Optional Components (not included):

• Apron Kit*

* see your American Standard Distributor

419mm
(18)
		44mm
		(1-3/4)
	C/L OF
210mm
	DRAIN
(8-1/4)

229mm X 305mm (9 X 12) CUTOUT FOR DRAIN

■LEVELING STRINGER (NOT FOR SUPPORT)

PROVIDE ACCESS TO PUMP FOR SERVICING ON ALL INSTALLATIONS

List of Required Components (not included):

•	Drain 1583.470*	• Bath Filler*
* see your American Standard Distributor
List of Required Tools and Supplies:
Tools		Supplies
•	Level	•	Nails
•	Tape Measure	•	Putty
•	Pipe Wrench	•	Caulking (waterproof)

102mm	38mm
(4)	(1-1/2)
	464mm
	(18-1/4)
	502mm
	(19-3/4)
	44mm
	(1-3/4)
INTEGRAL	457mm
FEET SUPPORT
	(3-5/8)
1-1/2 N.P.T.M. THREADS

•	Slip Joint Pliers	•	1 x 3 or 2 x 2
•	Screw Driver		Stringers
•	Standard	•	Drop Cloth
	Woodworking Tools	•	15 amp
•	Personal Safety		GFCI Outlet
	Equipment	•	Cement, Plaster,
•	Caulking Gun		Grout

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

1-1/2 O.D. TAILPIECE

GENERAL SPECIFICATIONS FOR 2645 WHIRLPOOL

INSTALLED SIZE		66 x 36 x 19-3/4 In. (1676 x 914 x 502mm)
WEIGHT								95 Lbs. (43 Kg.)
WEIGHT w/WATER							595 Lbs. (268 Kg.)
GAL. TO OVERFLOW									60 Gal. (227 L)
WHIRLPOOL MIN. OPERATING VOL.									55 Gal. (208 L)
BATHING WELL AT SUMP					46 x 24 In. (1168 x 610mm)
BATHING WELL AT RIM			62 X 31-1/2 In. (1575 x 800mm)
WATER DEPTH TO OVERFLOW							13-1/4 In. (337mm)
FLOOR LOADING				36 Lbs./Sq.Ft. (175 Kgs/Sq.m)
(PROJECTED AREA)
PTS.										25.6
CUBE (FT3)										45.1
	WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP						1.1 HP, 9.9 AMPS,120V.

After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.

If a whirlpool, do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping har- ness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

© American Standard Inc. 2003

750733-100 Rev. FAll product names listed herein are trademarks of American Standard nc un ess otherwise noted