American Standard 2664.102, 2664.202 dimensions Scala Corner Whirlpool & Bathing Pool

SCALA CORNER™

WHIRLPOOL & BATHING POOL

HIGH GLOSS ACRYLIC

SCALA CORNER WHIRLPOOL & BATHING POOL

❏2664.118 Whirlpool with right hand drain outlet

❏2664.218 Whirlpool with left hand drain outlet

•Acrylic with fiberglass reinforcement

•Factory installed and tested whirlpool

system

•1.0 HP single speed self-draining pump/motor with dry run seal

•Six multi-directional and individually flow-rate adjustable color-coordinated jets

•Two color-coordinated air volume controls

•Anti-vortex suction fitting

•Deck-mounted color-coordinated air switch On/Off control

•U.L.® Listed Hydromassage bathtub

•Textured tub bottom pattern

•Integral sump support feet

•Factory installed power cord with plug

•Dual molded-in lumbar support

•Molded-in seat

•Molded-in water retention flange

❏2664.102 Bathing Pool only with Right-hand Drain Outlet

❏2664.202 Bathing Pool only with Left-hand Drain Outlet

Nominal Dimensions: 1524 x 1524 x 502mm (60” x 60” x 19-3/4")

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•Underwriters Laboratories - Hydromassage Bathtubs UL 1795

•ASME A112.19.7M for Whirlpool Appliances

•ANSI Z124.1 for Plastic Bathtubs

•ASTM E162 for Flammability

•NFPA 258 for Smoke Density

To Be Specified - Required:

❏Bath Filler*

❏Drain: 1553.270 (specify Chrome , Polished Brass or Satin)

❏Color:

To Be Specified - Optional:

❏Metal Air Volume Control Kit: 9850.200-two

per kit (specify Chrome, Polished Brass or Satin)

❏Metal Jet Trim Ring Kit: 9860.200-two

per kit (specify Chrome or Polished Brass or Satin)

*See faucet section for models available

NOTE: Roughing-in dimensions and product specifications shown on reverse side of page.

SPS 2664

BV-029

Revised 3/98 © 2002 American Standard Inc.