American Standard 2722.102 RHO, 2722.102 LHO Illustration, Rough-Ininformation

ROUGH-IN INFORMATION:

GENERAL SPECIFICATIONS FOR 2722 BATHING POOL

INSTALLED SIZE				60 x 32 x 17 In.
		(1524 x 813 x 432mm)
WEIGHT					60 Lbs. (27 Kg)
WEIGHT w/WATER			393 Lbs.(179 Kg)
GAL. TO OVERFLOW					40 Gal. (151 L)
BATHING WELL AT SUMP		22 x 44 In. (559 x 1118mm)
BATHING WELL AT RIM		25.5 X 53 In.(648 x 1346mm)
WATER DEPTH TO OVERFLOW					10 In. (254mm)
FLOOR LOADING	29 Lbs./Sq.Ft. (195 Kgs/Sq.m)
(PROJECTED AREA)
PTS.							15.3
CUBE (FT3)						27

	60"
9-3/8"	(1524mm)
(238mm)	FINISHED	70mm
3/4"		(2-3/4)
(19mm)	WALL
15-1/8"
(385mm)
	229mm x 305mm
	(9 x 12)
	FLOOR
	CUTOUT
32"
(813mm)
25mm	4-1/2"
(1) C/L OF	(114mm)
DRAIN
		FINISHED
		WALL
TOP OF	3-1/2"
DECK	(89mm)
1"
(25mm)		SEE	16-3/4"
17"
		NOTE
			(425mm)
(432mm)
		2"
		(51mm)
			ROUGH
4-5/8"			FLOOR
	1-1/2 N.P.T. THREADS
(117mm)
	1-1/2 O.D. TAILPIECE
BATH SUPPORT
MATERIAL

1 INSTALLATION AND FRAMING INSTRUCTIONS:

A.) Locate studs as required. Ensure roughing-in dimensions are proper, plumb, and square. It is strongly recommended that an additional opening be provided for access to the drain components.

Illustration 1

Each alcove stud must be plumb and square.

B.) As shown in ILL. 2, mark the position of the underside of the deck by tracing a line onto the studs at the height indicated, using a level or other suitable straight edge.

C.) With the top of the stringer touching the traced line, attach the stringer to the studs.

Illustration 2
16-3/4
(425mm)			0
		3		)
				m
			m
		2
	6
	(7

D.) Install drain components to the bath following the manufacturer's instructions. See the roughing-in drawing for suggested opening size and location dimensions.

2

754049-100 Rev. G