Installation Instructions
ROPE TWIST™ BATHING POOL |
|
HIGH GLOSS ACRYLIC |
|
SHOWN LESS ALL FITTINGS |
|
MODELS: 2722.102 RHO |
|
2722.202 LHO |
|
USED WITH BATH WALLS: 5030.LBW |
|
Thank you for selecting |
|
for over 100 years. To ensure that your installation proceeds |
|
read these instructions carefully before you begin. | |
| |
BEFORE YOU BEGIN.... |
|
Local building codes vary by location. Observe all local plumbing and building codes.
Your new bath is shipped to you after careful inspection. All you need to finish the installation are your selected fittings. To insure maximum performance and pleasure from this product, please follow the instructions and cautions.
GENERAL INSTALLATION INFORMATION ....
1.WHEN INSTALLING THE MATCHING ROPE TWIST BATH WALLS (MODEL 5030.LBW), ADDITIONAL STUDS MAY BE REQUIRED. REFER TO THOSE INSTALLATION INSTRUCTIONS PRIOR TO INSTALLING TUB.
2.ROPE TWIST SHOWER WALLS ARE TO BE INSTALLED OVER STUD WALLS.
3.BATH MAY ONLY BE INSTALLED IN A RECESS TYPE INSTALLAION.
4.THIS BATH IS NOT
5.TAKE EXTRA CARE WHEN DRIVING NAILS OR SCREWS TO AVOID DAMAGING THE BATH.
TOOLS & MATERIALS REQUIRED.... |
|
| |
TOOLS: | MATERIALS: | ||
• | Level | • | Nails |
• | Square | • | Plumber’s Putty |
• | Tape Measure | • | Silicone Sealant |
• | Pipe Wrench | • | 1 x 3 or 2 x 4 Stringers |
• | Slip Joint Pliers | • | Drop Cloth |
• | Screw Driver | • | Mortar Mix or Grout (1 bag) |
•Standard Woodworking Tools
•Personal Safety Equipment
•Caulking Gun
NOTE: Take extra care in handling surfaces of the bath. Use only
HOTLINE FOR HELP
FOR TOLL FREE INFORMATION AND ANSWERS TO YOUR QUESTIONS, CALL:
1 (800)
© AS America, Inc. 2008
All product names listed herein are trademarks of AS America, Inc. unless otherwise noted.
1