American Standard 2722W.202 Rope Twist Bathing Pool, High Gloss Acrylic, H104, Revised 3/08

ROPE TWIST™

BATHING POOL

HIGH GLOSS ACRYLIC

		60"
	7-3/4"	(1524mm)
3/4"	(197mm)	FINISHED	70mm
(19mm)		WALL	(2-3/4)
15-1/8"
(385mm)
		229mm x 305mm
		(9 x 12)
		FLOOR
		CUTOUT
32"
(813mm)
25mm		4-1/2"
(1)	C/L OF	(114mm)
	DRAIN
				FINISHED
				WALL
TOP OF		3-1/2"
DECK		(89mm)
1"
(25mm)			SEE	16-3/4"
17"
			NOTE
				(425mm)
(432mm)
			2"
			(51mm)

4-5/8" (117mm)

BATH SUPPORT MATERIAL

ROUGH

FLOOR 1-1/2 N.P.T. THREADS

1-1/2 O.D. TAILPIECE

GENERAL SPECIFICATIONS FOR 2722W BATHING POOL

INSTALLED SIZE				60 x 32 x 17 In.
		(1524 x 813 x 432mm)
WEIGHT					60 Lbs. (27 Kg)
WEIGHT w/WATER			393 Lbs.(179 Kg)
GAL. TO OVERFLOW					40 Gal. (151 L)
BATHING WELL AT SUMP		22 x 44 In. (559 x 1118mm)
BATHING WELL AT RIM		25.5 X 53 In.(648 x 1346mm)
WATER DEPTH TO OVERFLOW					10 In. (254mm)
FLOOR LOADING	29 Lbs./Sq.Ft. (195 Kgs/Sq.m)
(PROJECTED AREA)
PTS.							15.3
CUBE (FT3)						27

NOTES:

BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS (2722W.202).

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standards Z124.1 and A112.19.7. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

	H104
© 2008 AS America Inc.		Revised 3/08