Fantom Vacuum SC710H Getting To Know Your Hard Surface Steam Cleaner, Voltage, 120V., 60Hz, Power

GETTING TO KNOW YOUR HARD SURFACE STEAM

CLEANER

	Unit Parts		Accessories
1.	Main Unit	8.	Measuring Cup
2.	Handle	9.	Funnel
3.	Trigger Button	10.	Steam diffuser
4.	Filler Hole	11.	Cleaning Cloth
5.	Safety Cap	12.	Concentrator Nozzle
6.	Indicator Light	13.	Window Squeegee
7.	Power Cord	14.	Small Detail Brush
		15.	Angle Adapter
Technical Specifications		16.	Hose
Voltage:		120V., 60Hz.
Power:		1000 Watts
Water Capacity:		9 Oz.

Illustrations may differ from actual product

USAGE SUGGESTIONS FOR YOUR HARD SURFACE

STEAM CLEANER

Upholstery

Use the steam diffuser with the cleaning cloth. Use fast, light strokes, avoid getting the fabric wet. Be patient with stubborn spots; work on a spot gently for no more than a minute at a time, then wait five minutes for the area to dry and repeat. Use circular movements or back-and-forth and side-to-side movements to get all sides of surface fibers. Finish with a brushing in one direction that will give the fabric a uniform appearance.

CAUTION: Always determine the color-fastness of any fabric - especially with reds or blues - by taking a clean, moist, warm towel and gently rubbing a small area as far down on the back or other out of the way place on the furniture as possible. If color comes off on the towel, you may need to have the piece dry cleaned.

Window, Glass Surfaces and Mirrors

To use the window squeegee, work with the vapor jet down using the top to bottom movements. To do this without leaving streaks, use lateral movements from the top to the bottom of the surface.

CAUTION: When cleaning outside windows, always avoid any sudden changes in temperature to prevent breakage or cracks.

Soap Scum

Soap scum dissolves almost immediately under a combination of heat and moisture. Rinse the surface with a small amount of water afterwards or go back over it once more with a clean terry cloth towel.

Notes: Soap scum sometimes will develop a hard surface from waterborne minerals. If this is the case, use the small detail brush first to break up this surface - or spray or wipe first with lemon, vinegar or seltzer soda water to soften the minerals.

Moving too slowly can dry out the soap scum and cause it to granulate on the surface. The surface will have a gritty feel. If this happens, apply vapor to the surface with the small detail brush again and re-clean.

Bathroom Areas

To clean the bathtub or shower area, use the small detail brush for grout, shower door tracks, hard to get areas and heavily soiled areas. Allow plenty of time for the heat to penetrate the surface. This is especially helpful in the shower area if there is tile or grout.

To clean the toilet, use small detail brush. Use a terry cloth towel or paper towel to wipe up excess moisture and residue.

To clean the sink and faucets, use small detail brush.

3 8