USAGE SUGGESTIONS FOR YOUR HARD SURFACE
STEAM CLEANER
CAUTION: This appliance must be unplugged from the electrical outlet and allowed to cool down before all cleaning and maintenance tasks.
•Let the appliance cool down completely before cleaning or storing.
•Empty all water from the water tank after each use.
•Store in a dry, cool place.
•A periodic rinse of your steam cleaner will free it from deposits. This is recommended every
Cleaning the Nozzles:
Your steamer should not normally require cleaning, however, should you notice a marked decrease in steam output it may be necessary to remove mineral deposit
1.Unplug steam cleaner from wall outlet.
2.Use a small diameter stiff metal wire such as a straightened metal paperclip and carefully insert the end of the wire into the nozzle orifice. See illustration below.
3.Move wire back and forth several times to remove any deposits.
4. | Reconnect appliance to power outlet, switch on and note steam output. |
5.If steam performance does not improve, repeat steps #1 through #4.
ADDITIONAL IMPORTANT SAFEGUARDS
1.To avoid circuit overload, do not operate another appliance on the same socket (circuit) as the steam cleaner.
2.If an extension cord is absolutely necessary, an extension cord rated a minimum of 15 ampere, 14 gage cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange cord so that it cannot be pulled or tripped over.
3.Do not leave unattended when the system is connected to a power supply/electrical outlet.
WARNING: This appliance is equipped with a grounded- type
CAUTION: Always drain condensed water from hose before use or if unit has been left idle for a period of time. To drain hose, direct nozzle into an appropriate container or sink and depress hand grip steam trigger. Once hose has been drained, normal use may be resumed. Never direct nozzle towards people, animals or plants.
WARNING: Your Steam Cleaner is designed to clean hard surfaces and upholstery that will withstand high heat. Do not use on soft plastics and cold glass. On surfaces that have been treated with wax or some no wax floors, the sheen may be removed by the heat and steam action. Do not use on unsealed wood. This could cause the wood grain to rise. It is therefore recommended to test an isolated area of the surface to be cleaned before proceeding.
IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the water used in this appliance.
Use regular water or distilled/purified water if the tap water in your area is very hard.
WARNING: Danger of Scalding. Please use caution when using the steam cleaner. The steam emitted from openings is very hot.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
9
2